Search Help For Tool Holder
Quick Search
Contact
STAR Micronics GmbHRobert-Grob-Straße 1
D-75305 Neuenbürg
+49 7082 7920-0
info@starmicronics.de
www.starmicronics.de
Shopping List
Shopping List is Empty
Your search did match the following Products:
| Cross drilling-/milling unit ER16 for backworking
Part Number: 0R1-51 fits on 8 Machines Request |
| Front drilling-/milling unit ER16 for backworking
ID-No.: 1017139 Part Number: 0R1-61 fits on 12 Machines Request |
| Front drilling-/milling unit ER16 for backworking; stronger bearings
ID-No.: 900720 Part Number: 101-81 fits on 12 Machines Request |
| Crossdrilling-/milling unit ER16
ID-No.: 1022546 Part Number: 331-50-00 fits on 20 Machines Request |
| 2-spindle front drilling-/milling unit ER16
ID-No.: 103713 Part Number: 541-51-00 fits on 8 Machines Request |
| Front drilling-/milling unit ER11 for backworking
ID-No.: 103712 Part Number: 541-61-00 fits on 17 Machines Request |
| Front tapping unit ER11 for backworking
ID-No.: 1072097 Part Number: 541-62-00 fits on 10 Machines Request |
| Front drilling-/milling unit ER16
ID-No.: 1013638 Part Number: 571-51-00 fits on 7 Machines Request |
| Front drilling-/milling unit ER16 for backworking
ID-No.: 1005818 Part Number: 571-61-00 fits on 12 Machines Request |
| Cross drilling-/milling unit ER11
Part Number: 571-63-00 , fits on 10 Machines Request |
| 3-spindle front drilling-/milling unit ER16
ID-No.: 1008896 Part Number: 661-51-00 fits on 8 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking
ID-No.: 1022627 Part Number: 661-59-00 fits on 8 Machines Request |
| 3-Spindle front drilling-/milling unit ER16 with 2-spindle drilling-/milling unit ER11 for backworking
ID-No.: 1005817 Part Number: 7.073.555 fits on 8 Machines Request |
| Cross drilling-/milling unit ER16
ID-No.: 1005223 Part Number: 7.073.789 fits on 16 Machines Request |
| Front drilling-/milling unit ER11 for backworking
ID-No.: 1013044 Part Number: 7.073.790 fits on 17 Machines Request |
| 2-spindle front drilling-/milling unit ER16
ID-No.: 1008534 Part Number: 7.073.791 fits on 8 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
ID-No.: 1018109 Part Number: 7.076.370 fits on 10 Machines Request |
| Cross drilling-/milling unit ER16; stronger bearings
ID-No.: 1025835 Part Number: 7.078.012 fits on 17 Machines Request |
| Front drilling-/milling unit ER11 for backworking internal Coolant supply ID-No.: 1027892 Part Number: 7.078.450 fits on 11 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
ID-No.: 1029196 Part Number: 7.078.800 fits on 9 Machines Request |
| 2-spindle front drilling-/milling unit ER16 (reinforced version)
ID-No.: 1032690 Part Number: 7.079.470 fits on 8 Machines Request |
| 2-spindle front drilling-/milling unit ER16 and slotting unit Ø13mm for backworking
ID-No.: 1039192 Part Number: 7.170.810 fits on 3 Machines Request |
| Drill sleeve ER16 for backworking
ID-No.: 1017999 Part Number: 0R1-22 fits on 9 Machines Request |
| Drill sleeve ER16 for backworking with coolant supply (internal)
ID-No.: 1127158 Part Number: 0R1-23 fits on 11 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 0R1-41 , fits on 10 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 0R1-42 , fits on 10 Machines Request |
| Boring sleeve Ø10mm for backworking
ID-No.: 1127166 Part Number: 0R1-43 fits on 10 Machines Request |
| Boring sleeve Ø4mm for backworking
Part Number: 0R1-47 , fits on 9 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 0T1-21 , fits on 3 Machines Request |
| Drill sleeve ER16 for backworking
Part Number: 101-04-00 , fits on 11 Machines Request |
| Drill sleeve ER20 for backworking
ID-No.: 1127159 Part Number: 101-05-00 fits on 9 Machines Request |
| Boring sleeve Ø16mm for backworking
Part Number: 101-11-00 , fits on 8 Machines Request |
| Boring sleeve Ø12mm for backworking
Part Number: 101-32-00 , fits on 10 Machines Request |
| 2-Spindle front drilling-/milling adapter for cross drilling unit ER11 [101-76] 20000 1/min Part Number: 101-77-00 , fits on 8 Machines Request |
| Drill sleeve ER20 for backworking
Part Number: 671-22-00 , fits on 10 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
ID-No.: 1023683 Part Number: 0M1-55 fits on 8 Machines Request |
| Polygon machining unit Ø60xØ13mm
Part Number: 0T1-91 , fits on 6 Machines Request |
| Crossdrilling-/milling unit ER11; 20000 1/min
Part Number: 101-75-00 , fits on 10 Machines Request |
| Crossdrilling-/milling unit ER11; 20000 1/min
Part Number: 101-76-00 , fits on 13 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 101-95-00 fits on 7 Machines Request |
| Slotting unit Ø50xØ13mm
ID-No.: 1008473 Part Number: 541-54-00 fits on 11 Machines Request |
| Crossdrilling-/milling unit ER16
ID-No.: 103716 Part Number: 571-55-00 fits on 14 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
ID-No.: 1019186 Part Number: 671-61-00 fits on 7 Machines Request |
| Thread whirling unit; adjustable (0° to -20°)
Part Number: 681-72-00 , fits on 11 Machines Request |
| Slotting unit Ø30xØ6mm for backworking
ID-No.: 1033414 Part Number: 7.072.855 fits on 17 Machines Request |
| Cross drilling-/milling unit ER20
ID-No.: 1005230 Part Number: 7.072.950 fits on 15 Machines Request |
| Skewed hole machining unit ER11 (360°)
ID-No.: 1006605 Part Number: 7.073.081 fits on 11 Machines Request |
| 2-spindle skewed hole machining unit ER11 (360°)
ID-No.: 1003991 Part Number: 7.073.190 fits on 10 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking; 18000 1/min
ID-No.: 1022480 Part Number: 7.073.830 fits on 11 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
ID-No.: 1004134 Part Number: 7.074.006 fits on 3 Machines Request |
| Cross drilling-/milling unit ER11; 16000 1/min; 6mm off-center
ID-No.: 1018254 Part Number: 7.074.470 fits on 9 Machines Request |
| 2-spindle skewed hole machining unit ER11 (360°); spindle 1 with coolant supply (internal)
ID-No.: 1011942 Part Number: 7.075.195 fits on 7 Machines Request |
| Front drilling-/milling unit ER11 for backworking; stronger bearings
ID-No.: 1013041 Part Number: 7.075.495 fits on 16 Machines Request |
| Cross drilling-/milling unit ER11 for backworking; heigh adjustible
ID-No.: 1013783 Part Number: 7.075.655 fits on 13 Machines Request |
| Slotting unit Ø50xØ13mm for backworking
ID-No.: 1017246 Part Number: 7.076.165 fits on 10 Machines Request |
| Slotting unit Ø50xØ6mm
ID-No.: 1018061 Part Number: 7.076.365 fits on 10 Machines Request |
| Milling unit for backworking; cutter arbor: Ø28mm
ID-No.: 1025487 Part Number: 7.077.965 fits on 15 Machines Request |
| Cross drilling-/milling unit ER8
ID-No.: 1026023 Part Number: 7.078.122 fits on 9 Machines Request |
| Slotting unit Ø50xØ10mm for backworking
ID-No.: 1026332 Part Number: 7.078.150 fits on 10 Machines Request |
| 2-spindle front drilling-/milling unit ER16 with coolant supply (internal)
ID-No.: 1026965 Part Number: 7.078.325 fits on 8 Machines Request |
| Slotting unit Ø50xØ13mm ID-No.: 1027046 Part Number: 7.078.338 fits on 3 Machines Request |
| Slotting unit Ø32xØ8mm for backworking
ID-No.: 1031529 Part Number: 7.079.230 fits on 10 Machines Request |
| Gear hobbing unit Ø8mm
ID-No.: 1033673 Part Number: 7.079.645 fits on 2 Machines Request |
| Gear hobbing unit Ø13mm; adjustable (±5°)
ID-No.: 1034645 Part Number: 7.079.815 fits on 2 Machines Request |
| Slotting unit Ø50xØ10mm
ID-No.: 1039729 Part Number: 7.170.912 fits on 11 Machines Request |
| Milling unit for backworking for ph HORN interface M117
ID-No.: 1039786 Part Number: 7.170.942 fits on 15 Machines Request |
| Slotting unit Ø30xØ5mm for backworking
ID-No.: 1040071 Part Number: 7.170.995 fits on 17 Machines Request |
| Thread whirling unit; adjustable (0°±20°)
ID-No.: 1052522 Part Number: 7.172.380 fits on 13 Machines Request |
| Gear hobbing unit Ø8mm
ID-No.: 1053141 Part Number: 7.172.820 fits on 2 Machines Request |
| Slotting unit Ø63xØ10mm for backworking (i=1,8:1)
ID-No.: 1079990 Part Number: 7.174.815 fits on 12 Machines Request |
| Tool holder with 15mm overhang; shank: 12x12mm
Part Number: 0G1-02 , fits on 3 Machines Request |
| Boring sleeve Ø4mm for backworking
Part Number: 101-06-00 , fits on 11 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 101-07-00 , fits on 11 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 101-08-00 , fits on 11 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 101-09-00 , fits on 11 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
ID-No.: 1103292 fits on 5 Machines Request |
| double drill sleeve ER11; shank: Ø22mm; for front- and backworking
Part Number: 301-23-00 , fits on 6 Machines Request |
| Drill sleeve ER16; shank: Ø22mm
Part Number: 301-24-00 , fits on 23 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 301-25-00 , fits on 24 Machines Request |
| Boring sleeve Ø6mm; shank: Ø22mm
Part Number: 301-41-00 , fits on 22 Machines Request |
| Boring sleeve Ø8mm; shank: Ø22mm
Part Number: 301-42-00 , fits on 22 Machines Request |
| Boring sleeve Ø10mm; shank: Ø22mm
Part Number: 301-43-00 , fits on 22 Machines Request |
| Drill sleeve ER20; shank: Ø22mm
Part Number: 331-21-00 , fits on 15 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (short type) for front- and backworking
Part Number: 421-22-00 , fits on 23 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (long type) for front- and backworking
Part Number: 421-27-00 , fits on 23 Machines Request |
| Drill sleeve ER16 for backworking
Part Number: 541-21-00 , fits on 16 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 541-71-00 , fits on 16 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 541-72-00 , fits on 16 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 541-73-00 , fits on 16 Machines Request |
| Boring sleeve Ø4mm for backworking
Part Number: 571-71-00 , fits on 14 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; with coolant supply (internal)
Part Number: 671-26-00 , fits on 10 Machines Request |
| Drill sleeve ER16 for backworking with coolant supply (internal)
Part Number: 671-27-00 , fits on 11 Machines Request |
| Sleeve holder for deep drilling Ø10mm for backworking
ID-No.: 1020539 Part Number: 7.073.595 fits on 10 Machines Request |
| Sleeve holder for deep drilling Ø10mm
ID-No.: 1018401 Part Number: 7.073.762 fits on 11 Machines Request |
| Triple sleeve holder Ø22mm
ID-No.: 1014940 Part Number: 7.075.795 fits on 9 Machines Request |
| Sleeve holder Ø22mm for high speed spindle
ID-No.: 1017617 Part Number: 7.076.305 fits on 13 Machines Request |
| Sleeve holder for deep drilling Ø16mm
ID-No.: 1018403 Part Number: 7.076.425 fits on 11 Machines Request |
| Double sleeve holder Ø25mm
ID-No.: 1019984 Part Number: 7.076.728 fits on 11 Machines Request |
| Sleeve holder for deep drilling Ø12mm for backworking with coolant supply (internal)
ID-No.: 1020543 Part Number: 7.076.904 fits on 10 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
ID-No.: 1023457 Part Number: 7.077.480 fits on 9 Machines Request |
| Sleeve holder for deep drilling Ø12mm
ID-No.: 1036928 Part Number: 7.170.390 fits on 11 Machines Request |
| Sleeve holder for deep drilling Ø16mm
ID-No.: 1039407 Part Number: 7.170.845 fits on 11 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 736-21-00 , fits on 13 Machines Request |
Copyright 2026 STAR Micronics | Home
| Who we are