Search Help For Tool Holder
Quick Search
Contact
STAR Micronics GmbHRobert-Grob-Straße 1
D-75305 Neuenbürg
+49 7082 7920-0
info@starmicronics.de
www.starmicronics.de
Shopping List
Shopping List is Empty
Your search did match the following Products:
| 3-spindle front drilling-/milling unit ER11 for backworking
Part Number: 0E1-51 , fits on 3 Machines Request |
| Cross drilling-/milling unit ER11 for backworking
Part Number: 0E1-52 , fits on 2 Machines Request |
| Crossdrilling-/milling unit ER16
ID-No.: 1022546 Part Number: 331-50-00 fits on 20 Machines Request |
| 2-spindle front drilling-/milling unit ER16
ID-No.: 103713 Part Number: 541-51-00 fits on 8 Machines Request |
| Front drilling-/milling unit ER11 for backworking
ID-No.: 103712 Part Number: 541-61-00 fits on 17 Machines Request |
| Front tapping unit ER11 for backworking
ID-No.: 1072097 Part Number: 541-62-00 fits on 10 Machines Request |
| Front drilling-/milling unit ER16
ID-No.: 1013638 Part Number: 571-51-00 fits on 7 Machines Request |
| Front drilling-/milling unit ER16 for backworking
ID-No.: 1005818 Part Number: 571-61-00 fits on 12 Machines Request |
| Cross drilling-/milling unit ER11
Part Number: 571-63-00 , fits on 10 Machines Request |
| 3-spindle front drilling-/milling unit ER16
ID-No.: 1008896 Part Number: 661-51-00 fits on 8 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking
ID-No.: 1022627 Part Number: 661-59-00 fits on 8 Machines Request |
| 3-Spindle front drilling-/milling unit ER16 with 2-spindle drilling-/milling unit ER11 for backworking
ID-No.: 1005817 Part Number: 7.073.555 fits on 8 Machines Request |
| Cross drilling-/milling unit ER16
ID-No.: 1005223 Part Number: 7.073.789 fits on 16 Machines Request |
| Front drilling-/milling unit ER11 for backworking
ID-No.: 1013044 Part Number: 7.073.790 fits on 17 Machines Request |
| 2-spindle front drilling-/milling unit ER16
ID-No.: 1008534 Part Number: 7.073.791 fits on 8 Machines Request |
| Crossdrilling-/milling unit DECOFLEX®15 ID-No.: 1004575 Part Number: 7.074.304 Also Available 188 Adapter fits on 20 Machines Request |
| 3-spindle front drilling-/milling unit DECOFLEX®15
ID-No.: 1005814 Part Number: 7.074.700 Also Available 188 Adapter fits on 8 Machines Request |
| Front drilling-/milling unit DECOFLEX®15 for backworking
ID-No.: 1006210 Part Number: 7.074.705 Also Available 188 Adapter fits on 15 Machines Request |
| 2-spindle front drilling-/milling unit DECOFLEX®15
ID-No.: 1006279 Part Number: 7.074.710 Also Available 188 Adapter fits on 8 Machines Request |
| 2-spindle double front drilling-/milling unit DECOFLEX®15 for front- and backworking
ID-No.: 1006380 Part Number: 7.074.715 Also Available 188 Adapter fits on 9 Machines Request |
| Cross drilling-/milling unit ER16; stronger bearings
ID-No.: 1025835 Part Number: 7.078.012 fits on 17 Machines Request |
| 2-spindle front drilling-/milling unit ER16 (reinforced version)
ID-No.: 1032690 Part Number: 7.079.470 fits on 8 Machines Request |
| Front drilling-/milling unit DECOFLEX®15
ID-No.: 1033578 Part Number: 7.079.624 Also Available 188 Adapter fits on 13 Machines Request |
| Drill sleeve ER20 for backworking
Part Number: 671-22-00 , fits on 10 Machines Request |
| Cross drilling-/milling unit modification set DECOFLEX®15 T31-T33 ID-No.: 1006911 Part Number: 7.074.777 Also Available 188 Adapter fits on Star SR-20RIII Request |
| 6-station tool holder (1x original; shank: 12x12mm; 5x DECOFLEX®15)
ID-No.: 1012926 Part Number: 7.075.400 Also Available 188 Adapter fits on Star SR-20RIII Request |
| 6-station tool holder (2x original; shank: 12x12mm; 4x DECOFLEX®15) with coolant supply (internal)
ID-No.: 1017001 Part Number: 7.076.144 Also Available 188 Adapter fits on Star SR-20RIII Request |
| Drill sleeve DECOFLEX®15 for backworking
ID-No.: 1033719 Part Number: 7.079.623 Also Available 188 Adapter fits on 10 Machines Request |
| Upgrade set for cross drilling-/milling unit DECOFLEX®15 T31-T33
ID-No.: 1035131 Part Number: 7.079.940 Also Available 188 Adapter fits on Star SR-20RIII Request |
| 6-station tool holder DECOFLEX®15
ID-No.: 1038545 Part Number: 7.170.675 Also Available 188 Adapter fits on Star SR-20RIII Request |
| 4-spindle tool holder DECOFLEX®15; with coolant supply (internal)
ID-No.: 1038562 Part Number: 7.170.712 Also Available 188 Adapter fits on Star SR-20RIII Request |
| Cross drilling-/milling unit modification set DECOFLEX®15 T31-T33 ID-No.: 1077287 Part Number: 7.174.570 Also Available 188 Adapter fits on Star SR-20RIII Request |
| Slotting unit Ø50xØ13mm
ID-No.: 1008473 Part Number: 541-54-00 fits on 11 Machines Request |
| Polygon machining unit Ø50xØ13mm
Part Number: 541-91-00 , fits on 3 Machines Request |
| Crossdrilling-/milling unit ER16
ID-No.: 103716 Part Number: 571-55-00 fits on 14 Machines Request |
| Thread whirling unit; adjustable (0° to -20°)
Part Number: 681-72-00 , fits on 11 Machines Request |
| Slotting unit Ø50xØ13mm for backworking; stronger bearings
ID-No.: 1005282 Part Number: 7.072.661 fits on 5 Machines Request |
| Slotting unit Ø45xØ10mm for backworking (i=1,8:1)
ID-No.: 1013733 Part Number: 7.072.701 fits on 7 Machines Request |
| Slotting unit Ø30xØ8mm for backworking (i=1,8:1)
ID-No.: 1033400 Part Number: 7.072.720 fits on 7 Machines Request |
| Slotting unit Ø30xØ6mm for backworking
ID-No.: 1033414 Part Number: 7.072.855 fits on 17 Machines Request |
| Cross drilling-/milling unit ER20
ID-No.: 1005230 Part Number: 7.072.950 fits on 15 Machines Request |
| Cross drilling-/milling unit ER11 for backworking
ID-No.: 1008962 Part Number: 7.072.970 fits on 3 Machines Request |
| Skewed hole machining unit ER11 (360°)
ID-No.: 1006605 Part Number: 7.073.081 fits on 11 Machines Request |
| 2-spindle skewed hole machining unit ER11 (360°)
ID-No.: 1003991 Part Number: 7.073.190 fits on 10 Machines Request |
| Milling unit for backworking for ph HORN tools
ID-No.: 1036758 Part Number: 7.073.200 fits on 5 Machines Request |
| Gear hobbing unit Ø8mm; adjustible ±5°
ID-No.: 1005720 Part Number: 7.073.800 fits on 6 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking; 18000 1/min
ID-No.: 1022480 Part Number: 7.073.830 fits on 11 Machines Request |
| Thread whirling unit; adjustable (1°-20°); SCHWANOG type No. 194346
ID-No.: 1035174 Part Number: 7.074.191 fits on 10 Machines Request |
| Slotting unit Ø56xØ13mm
ID-No.: 1022461 Part Number: 7.074.310 fits on 8 Machines Request |
| Cross drilling-/milling unit ER11; 16000 1/min; 6mm off-center
ID-No.: 1018254 Part Number: 7.074.470 fits on 9 Machines Request |
| Slotting unit Ø80xØ13m (i=2,666:1)
ID-No.: 1011722 Part Number: 7.075.160 fits on 8 Machines Request |
| 2-spindle skewed hole machining unit ER11 (360°); spindle 1 with coolant supply (internal)
ID-No.: 1011942 Part Number: 7.075.195 fits on 7 Machines Request |
| Slotting unit Ø63xØ16mm; angle adjustable for backworking
ID-No.: 1012951 Part Number: 7.075.395 fits on 3 Machines Request |
| Front drilling-/milling unit ER11 for backworking; stronger bearings
ID-No.: 1013041 Part Number: 7.075.495 fits on 16 Machines Request |
| Front drilling-/milling unit ER16 for T33
ID-No.: 1013667 Part Number: 7.075.625 fits on 2 Machines Request |
| 4-spindle front drilling-/milling unit ER11 for backworking
ID-No.: 1015915 Part Number: 7.075.935 fits on 3 Machines Request |
| Slotting unit Ø50xØ6mm
ID-No.: 1018061 Part Number: 7.076.365 fits on 10 Machines Request |
| Slotting unit Ø80xØ22mm
ID-No.: 1023804 Part Number: 7.077.570 fits on 5 Machines Request |
| Milling unit for backworking; cutter arbor: Ø28mm
ID-No.: 1025487 Part Number: 7.077.965 fits on 15 Machines Request |
| Cross drilling-/milling unit ER8
ID-No.: 1026023 Part Number: 7.078.122 fits on 9 Machines Request |
| Slotting unit Ø80xØ16mm
ID-No.: 1026845 Part Number: 7.078.290 fits on 9 Machines Request |
| 2-spindle front drilling-/milling unit ER16 with coolant supply (internal)
ID-No.: 1026965 Part Number: 7.078.325 fits on 8 Machines Request |
| Crossdrilling-/milling unit DECOFLEX®15
ID-No.: 1033616 Part Number: 7.079.619 Also Available 188 Adapter fits on 20 Machines Request |
| Slotting unit Ø50xØ10mm
ID-No.: 1039729 Part Number: 7.170.912 fits on 11 Machines Request |
| Milling unit for backworking for ph HORN interface M117
ID-No.: 1039786 Part Number: 7.170.942 fits on 15 Machines Request |
| Slotting unit Ø30xØ5mm for backworking
ID-No.: 1040071 Part Number: 7.170.995 fits on 17 Machines Request |
| Gear hobbing unit Ø8mm
ID-No.: 1043092 Part Number: 7.171.760 fits on 5 Machines Request |
| Thread whirling unit; adjustable (0°±20°)
ID-No.: 1052522 Part Number: 7.172.380 fits on 13 Machines Request |
| Gear hobbing unit Ø8mm; adjustible ±5°
ID-No.: 1053102 Part Number: 7.172.950 fits on 6 Machines Request |
| Slotting unit Ø63xØ10mm for backworking (i=1,8:1)
ID-No.: 1079990 Part Number: 7.174.815 fits on 12 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
ID-No.: 1103292 fits on 5 Machines Request |
| Drill sleeve ER16; shank: Ø22mm
Part Number: 301-24-00 , fits on 23 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 301-25-00 , fits on 24 Machines Request |
| Boring sleeve Ø6mm; shank: Ø22mm
Part Number: 301-41-00 , fits on 22 Machines Request |
| Boring sleeve Ø8mm; shank: Ø22mm
Part Number: 301-42-00 , fits on 22 Machines Request |
| Boring sleeve Ø10mm; shank: Ø22mm
Part Number: 301-43-00 , fits on 22 Machines Request |
| Drill sleeve ER20; shank: Ø22mm
Part Number: 331-21-00 , fits on 15 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (short type) for front- and backworking
Part Number: 421-22-00 , fits on 23 Machines Request |
| Drill sleeve ER16 for backworking
Part Number: 541-21-00 , fits on 16 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 541-71-00 , fits on 16 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 541-72-00 , fits on 16 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 541-73-00 , fits on 16 Machines Request |
| Boring sleeve Ø4mm for backworking
Part Number: 571-71-00 , fits on 14 Machines Request |
| Idler shaft
Part Number: 571-89-00 , fits on 5 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 681-21-00 , fits on 2 Machines Request |
| Double sleeve holder Ø22mm for high speed spindle
ID-No.: 1006621 Part Number: 7.073.375 fits on 8 Machines Request |
| Double sleeve holder Ø25mm for high speed spindle
ID-No.: 1006620 Part Number: 7.073.376 fits on 8 Machines Request |
| Sleeve holder for deep drilling Ø10mm for backworking
ID-No.: 1020539 Part Number: 7.073.595 fits on 10 Machines Request |
| Sleeve holder for deep drilling Ø10mm
ID-No.: 1018401 Part Number: 7.073.762 fits on 11 Machines Request |
| Double sleeve holder Ø22mm and Ø25mm for high speed spindle
ID-No.: 1014678 Part Number: 7.073.856 fits on 8 Machines Request |
| 6-station tool holder; shank: 16x16mm
ID-No.: 1062503 Part Number: 7.074.180 fits on 2 Machines Request |
| Triple sleeve holder Ø22mm
ID-No.: 1014940 Part Number: 7.075.795 fits on 9 Machines Request |
| 4-station sleeve holder Ø22mm under T11-T14
ID-No.: 1014909 Part Number: 7.075.797 fits on 3 Machines Request |
| Triple sleeve holder Ø22mm
ID-No.: 1017122 Part Number: 7.076.172 fits on 5 Machines Request |
| Sleeve holder Ø22mm for high speed spindle
ID-No.: 1017617 Part Number: 7.076.305 fits on 13 Machines Request |
| Double sleeve holder Ø30mm for high speed spindle
ID-No.: 1017907 Part Number: 7.076.342 fits on 7 Machines Request |
| Sleeve holder for deep drilling Ø16mm
ID-No.: 1018403 Part Number: 7.076.425 fits on 11 Machines Request |
| Double sleeve holder Ø25mm
ID-No.: 1019984 Part Number: 7.076.728 fits on 11 Machines Request |
| Sleeve holder for deep drilling Ø12mm for backworking with coolant supply (internal)
ID-No.: 1020543 Part Number: 7.076.904 fits on 10 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
ID-No.: 1023457 Part Number: 7.077.480 fits on 9 Machines Request |
| Sleeve holder for deep drilling Ø12mm
ID-No.: 1036928 Part Number: 7.170.390 fits on 11 Machines Request |
| Sleeve holder for deep drilling Ø16mm
ID-No.: 1039407 Part Number: 7.170.845 fits on 11 Machines Request |
Copyright 2026 STAR Micronics | Home
| Who we are