Search Help For Tool Holder
Quick Search
Contact
STAR Micronics GmbHRobert-Grob-Straße 1
D-75305 Neuenbürg
+49 7082 7920-0
info@starmicronics.de
www.starmicronics.de
Shopping List
Shopping List is Empty
Your search did match the following Products:
| Cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (internal)
ID-No.: 1027453 Part Number: 7.078.470 Also Available 55 Adapter fits on 3 Machines Request |
| Crossdrilling-/milling unit ER16
ID-No.: 1022546 Part Number: 331-50-00 fits on 20 Machines Request |
| Crossdrilling-/milling unit DECOFLEX®15 ID-No.: 1004575 Part Number: 7.074.304 Also Available 188 Adapter fits on 20 Machines Request |
| Cross drilling-/milling unit DECOFLEX®15
ID-No.: 1006641 Part Number: 7.074.780 Also Available 188 Adapter fits on 5 Machines Request |
| 2-spindle cross drilling-/milling unit DECOFLEX®15
ID-No.: 1006761 Part Number: 7.074.790 Also Available 188 Adapter fits on 4 Machines Request |
| 2-spindle double drilling-/milling unit DECOFLEX®15 for front- and backworking
ID-No.: 1007539 Part Number: 7.074.800 Also Available 188 Adapter fits on 3 Machines Request |
| Cross drilling-/milling unit ER16; stronger bearings
ID-No.: 1025835 Part Number: 7.078.012 fits on 17 Machines Request |
| Upgrate set for Drilling/milling unit DECOFLEX® 15 (T11-T15)
ID-No.: 1055827 Part Number: 7.173.564 Also Available 188 Adapter fits on 4 Machines Request |
| wedge type tool holder; shank: 16x16mm
ID-No.: 1022647 Part Number: 221-01-00 fits on 5 Machines Request |
| 2-station tool holder DECOFLEX®20 with coolant supply (external or internal)
ID-No.: 1012914 Part Number: 7.075.453 Also Available 66 Adapter fits on 6 Machines Request |
| 4-station tool holder DECOFLEX®20 for front- and backworking with coolant supply (internal)
ID-No.: 1016416 Part Number: 7.076.006 Also Available 66 Adapter fits on 7 Machines Request |
| 5-Station DECOFLEX® 20 and tool holder 16x16
ID-No.: 1055770 Part Number: 7.173.563 Also Available 66 Adapter fits on Star SV-20 Request |
| Front drilling unit ER16 for deep drilling for backworking with coolant supply (internal)
ID-No.: 1130142 fits on 4 Machines Request |
| Front drilling unit ER16 for deep drilling for backworking with coolant supply (internal)
Part Number: 1130614 fits on 4 Machines Request |
| Cross drilling-/milling unit ER16
ID-No.: 1022522 Part Number: 221-50-00 fits on 5 Machines Request |
| Cross tapping unit ER11
ID-No.: 1081205 Part Number: 221-51-00 fits on 3 Machines Request |
| Front tapping unit ER11
Part Number: 221-53-00 , fits on 3 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking
ID-No.: 1022542 Part Number: 221-56-00 fits on 4 Machines Request |
| Cross tapping unit ER11
Part Number: 331-51-00 , fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit ER16
ID-No.: 1006677 Part Number: 421-51-00 fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit ER11; 9500 1/min
ID-No.: 1011436 Part Number: 421-52-00 fits on 4 Machines Request |
| Slotting unit Ø50xØ13mm
Part Number: 421-54-00 , fits on 4 Machines Request |
| Skewed hole drilling-/milling unit ER11 (0-60°)
Part Number: 421-55-00 , fits on 4 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking
ID-No.: 1022669 Part Number: 421-59-00 fits on 5 Machines Request |
| Thread whirling unit; adjustable (1°-10°)
Part Number: 421-73-00 , fits on Star SV-20 Request |
| Polygon machining unit Ø70xØ16mm
Part Number: 421-81-00 , fits on 5 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking 12000 1/min; with coolant supply (external) ID-No.: 1006661 Part Number: 451-59-00 fits on Star SV-20 Request |
| Polygon machining-/thread milling unit Ø70xØ16mm (±30°)
Part Number: 451-71-00 , fits on 4 Machines Request |
| Thread whirling unit; adjustable (1 - 10°); with coolant supply (external)
Part Number: 451-72-00 , fits on 3 Machines Request |
| Thread whirling unit; ajustable (0°±10°)
Part Number: 541-78-00 , fits on 2 Machines Request |
| Skewed hole machining unit ER20 (+90° to -55°)
ID-No.: 1070748 Part Number: 7.070.370 fits on Star SV-20 Request |
| Cross drilling-/milling unit ER20
ID-No.: 1005230 Part Number: 7.072.950 fits on 15 Machines Request |
| Cross drilling-/milling unit ER20
ID-No.: 1038493 Part Number: 7.073.160 fits on 5 Machines Request |
| double front drilling-/ milling unit ER16 for front- and backworking
ID-No.: 1022051 Part Number: 7.073.210 fits on 3 Machines Request |
| 2-spindle double front drilling-/milling unit ER16 for front- and backworking
ID-No.: 1004856 Part Number: 7.073.550 fits on Star SV-20 Request |
| Skewed hole drilling-/milling unit ER16 (180°)
ID-No.: 1004489 Part Number: 7.073.560 fits on 5 Machines Request |
| Front drilling unit ER16 for deep drilling with coolant supply (internal)
ID-No.: 1022075 Part Number: 7.073.660 fits on 4 Machines Request |
| Thread whirling unit; adjustable (1°-15°); for backworking; SCHWANOG type No. 191482
ID-No.: 1007438 Part Number: 7.073.670 fits on 2 Machines Request |
| Thread whirling unit adjustable (1°-15°); SCHWANOG type No. 191428 ID-No.: 1007506 Part Number: 7.073.765 fits on 2 Machines Request |
| Cross drilling-/milling unit ER16
ID-No.: 1048264 Part Number: 7.073.792 fits on 5 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking; 18000 1/min
ID-No.: 1011321 Part Number: 7.073.840 fits on 5 Machines Request |
| Gear hobbing unit Ø10mm (±20°); i=23:16
ID-No.: 1017328 Part Number: 7.073.885 fits on 3 Machines Request |
| Cross drilling-/milling unit ER11
ID-No.: 1023091 Part Number: 7.074.038 fits on 5 Machines Request |
| Polygon machining unit Ø98xØ16mm
ID-No.: 1002207 Part Number: 7.074.060 fits on 3 Machines Request |
| Cross drilling-/milling unit ER11; 16000 1/min; 6mm off-center
ID-No.: 1018254 Part Number: 7.074.470 fits on 9 Machines Request |
| Front drilling unit ER16 for deep drilling for backworking with coolant supply (internal)
ID-No.: 1012590 Part Number: 7.075.350 fits on 3 Machines Request |
| Thread whirling unit; adjustable (0°±15°); GLOOR type
ID-No.: 1012859 Part Number: 7.075.435 fits on 2 Machines Request |
| Cross drilling-/milling unit ER8
ID-No.: 1026023 Part Number: 7.078.122 fits on 9 Machines Request |
| Crossdrilling-/milling unit DECOFLEX®15
ID-No.: 1033616 Part Number: 7.079.619 Also Available 188 Adapter fits on 20 Machines Request |
| 2-spindle cross drilling unit DECOFLEX®15
ID-No.: 1036762 Part Number: 7.170.355 Also Available 188 Adapter fits on 2 Machines Request |
| tool holder; shank: 16x16mm; adjustable in height
ID-No.: 1081198 Part Number: 221-03-00 fits on 3 Machines Request |
| Tool holder; shank: 16x16mm; for inverse turning direction
Part Number: 221-07-00 , fits on 5 Machines Request |
| tool holder; shank: 16x16mm; for inverse turning direction; adjustable in height
ID-No.: 1059538 Part Number: 221-08-00 fits on 4 Machines Request |
| Sleeve holder for deep drilling Ø22mm
ID-No.: 1059540 Part Number: 221-11-00 fits on 4 Machines Request |
| tool holder; shank: 16x16mm; for backworking; adjustable in height
Part Number: 221-72-00 , fits on 4 Machines Request |
| Thread die sleeve Ø20mm; shank: Ø22mm
Part Number: 301-36-00 , fits on 3 Machines Request |
| Thread die sleeve Ø25mm; shank: Ø22mm
Part Number: 301-37-00 , fits on 5 Machines Request |
| Tool holder with 20mm overhang; shank: 12x12mm
Part Number: 311-01-00 , fits on 2 Machines Request |
| Tool holder with 17mm overhang; shank: 16x16mm
ID-No.: 1072093 Part Number: 331-01-00 fits on 4 Machines Request |
| 5-station tool holder; shank: 12x12mm
Part Number: 421-01-00 , fits on 2 Machines Request |
| 3-station tool holder; shank: 12x12mm
Part Number: 421-02-00 , fits on 3 Machines Request |
| 3-station tool holder; shank: 12x12mm; for backworking
Part Number: 421-03-00 , fits on 3 Machines Request |
| 4-station tool holder; shank: 16x16mm
Part Number: 421-04-00 , fits on 4 Machines Request |
| Triple sleeve holder Ø32mm
Part Number: 421-11-00 , fits on 5 Machines Request |
| Triple sleeve holder Ø22mm
Part Number: 421-12-00 , fits on 5 Machines Request |
| double drill sleeve ER20; shank: Ø32mm; (short type) for front- and backworking
Part Number: 421-21-00 , fits on 12 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (short type) for front- and backworking
Part Number: 421-22-00 , fits on 23 Machines Request |
| double drill sleeve ER20; shank: Ø32mm; (long type) for front- and backworking
Part Number: 421-26-00 , fits on 12 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (long type) for front- and backworking
Part Number: 421-27-00 , fits on 23 Machines Request |
| double tap sleeve ER16; shank: Ø32mm; for front- and backworking
Part Number: 421-31-00 , fits on 4 Machines Request |
| double tap sleeve ER16; shank: Ø22mm; for front- and backworking
Part Number: 421-32-00 , fits on 10 Machines Request |
| Sleeve holder Ø30mm
ID-No.: 1016231 Part Number: 7.074.275 fits on 2 Machines Request |
| Sleeve holder for deep drilling Ø30mm with coolant supply (internal)
ID-No.: 1016232 Part Number: 7.074.280 fits on 2 Machines Request |
| Special sleeve ER20 for 7.074.275 or 7.074.280
ID-No.: 1042713 Part Number: 7.074.315 fits on 2 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external or internal)
ID-No.: 1004167 Part Number: 7.074.495 fits on 3 Machines Request |
| Double sleeve holder Ø25mm for high speed spindle
ID-No.: 1005279 Part Number: 7.074.650 fits on 9 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external or internal)
ID-No.: 1022919 Part Number: 7.077.405 fits on 4 Machines Request |
| Triple sleeve holder Ø32mm with coolant supply (external or internal)
ID-No.: 1022922 Part Number: 7.077.406 fits on 5 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 736-21-00 , fits on 13 Machines Request |
| Tap sleeve MT1; shank: Ø22mm
Part Number: 736-22-00 , fits on 9 Machines Request |
| Boring sleeve Ø8mm; shank: Ø22mm
Part Number: 736-40-00 , fits on 10 Machines Request |
| Boring sleeve Ø10mm; shank: Ø22mm
Part Number: 736-41-00 , fits on 10 Machines Request |
| Boring sleeve Ø12mm; shank: Ø22mm
Part Number: 736-42-00 , fits on 10 Machines Request |
| Boring sleeve Ø6mm; shank: Ø22mm
Part Number: 736-44-00 , fits on 10 Machines Request |
| Boring sleeve Ø16mm; shank: Ø32mm
Part Number: 781-43-00 , fits on 9 Machines Request |
Copyright 2026 STAR Micronics | Home
| Who we are