Search Help For Tool Holder
Quick Search
Contact
STAR Micronics GmbHRobert-Grob-Straße 1
D-75305 Neuenbürg
+49 7082 7920-0
info@starmicronics.de
www.starmicronics.de
Shopping List
Shopping List is Empty
Your search did match the following Products:
| 2-spindle front drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 1102831 Also Available 55 Adapter fits on Star SX-38-B Request |
| 2-spindle front drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 1103061 Also Available 55 Adapter fits on Star SX-38-B Request |
| Cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 1124811 Also Available 55 Adapter fits on 2 Machines Request |
| Broching tool holder PRECI-FLEX® ER20
Part Number: 7.074.600 Also Available 55 Adapter fits on 2 Machines Request |
| Cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 7.074.845 Also Available 55 Adapter fits on 4 Machines Request |
| Cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external or internal)
Part Number: 7.074.855 Also Available 55 Adapter fits on 4 Machines Request |
| 2-spindle front drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 7.074.885 Also Available 55 Adapter fits on 4 Machines Request |
| Cross drilling-/milling unit with PRECI-FLEX® ER25 with coolant supply (external or internal)
Part Number: 7.074.917 Also Available 88 Adapter fits on 4 Machines Request |
| 2-spindle front drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external or internal)
Part Number: 7.074.950 Also Available 55 Adapter fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (internal)
Part Number: 7.075.135 Also Available 55 Adapter fits on 2 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 7.075.190 Also Available 55 Adapter fits on 2 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (internal)
Part Number: 7.075.220 Also Available 55 Adapter fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 7.075.225 Also Available 55 Adapter fits on 4 Machines Request |
| Cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (internal)
Part Number: 7.078.015 Also Available 55 Adapter fits on 2 Machines Request |
| Cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (internal)
Part Number: 7.078.470 Also Available 55 Adapter fits on 3 Machines Request |
| Front Drilling Unit ER20A Part Number: 7.173.896 Also Available 55 Adapter fits on 2 Machines Request |
| Cross drilling-/milling unit PRECI-FLEX® ER25 with coolant supply (external)
Part Number: 7.173.900 Also Available 88 Adapter fits on Star SX-38-B Request |
| Cross drilling-/milling unit with PRECI-FLEX® ER25 with coolant supply (external or internal)
Part Number: 7.174.465 Also Available 88 Adapter fits on Star SX-38-B Request |
| 3-spindle front drilling-/milling unit ER11 for backworking
Part Number: 0E1-51 , fits on 3 Machines Request |
| Cross drilling-/milling unit ER11 for backworking
Part Number: 0E1-52 , fits on 2 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
Part Number: 0R1-51 fits on 8 Machines Request |
| Front drilling-/milling unit ER16 for backworking
Part Number: 0R1-61 fits on 12 Machines Request |
| Cross drilling-/milling unit ER11
Part Number: 101-52-00 fits on 2 Machines Request |
| Cross drilling-/milling unit ER8
Part Number: 101-64-00 , fits on 2 Machines Request |
| Cross drilling-/milling unit ER20
Part Number: 101-68-00 fits on Star SR-38 (Type A/B) Request |
| Front drilling-/milling unit ER16 for backworking; stronger bearings
Part Number: 101-81 fits on 12 Machines Request |
| 2-spindle cross drilling-/milling unit ER11
Part Number: 1104221 fits on Star SR-20J/JN SR-20JII-A Request |
| Crossdrilling-/milling unit DECOFLEX®15
Part Number: 1124812 Also Available 183 Adapter fits on 2 Machines Request |
| Drilling/milling unit DECOFLEX® 15
Part Number: 1125003 Also Available 183 Adapter fits on Star SR-38 (Type A/B) Request |
| Upgrade set for B-Axis (T16-T19) cross drilling-/milling unit DECOFLEX®20 internal coolant high pressure
Part Number: 1126143 Also Available 64 Adapter fits on Star SD-26C/E/G/S Request |
| Crossdrilling-/milling unit DECOFLEX®15 Part Number: 1126162 Also Available 183 Adapter fits on Star SD-26C/E/G/S Request |
| Slotting unit Ø50xØ13mm
Part Number: 141-59-00 , fits on Star SL-7/10 Request |
| Cross drilling-/milling unit ER16
Part Number: 201-50-00 fits on 5 Machines Request |
| Cross tapping unit ER11
Part Number: 201-51-00 fits on 5 Machines Request |
| Crossdrilling-/milling unit ER16
Part Number: 331-50-00 fits on 20 Machines Request |
| 2-spindle cross drilling-/milling unit ER16
Part Number: 431-51-00 fits on 5 Machines Request |
| 2-spindle front drilling-/milling unit ER16
Part Number: 541-51-00 fits on 8 Machines Request |
| Front drilling-/milling unit ER11 for backworking
Part Number: 541-61-00 fits on 17 Machines Request |
| Front tapping unit ER11 for backworking
Part Number: 541-62-00 fits on 10 Machines Request |
| Front drilling-/milling unit ER16
Part Number: 571-51-00 fits on 7 Machines Request |
| Slotting unit Ø50xØ13mm
Part Number: 571-54-00 , fits on 2 Machines Request |
| Front drilling-/milling unit ER11
Part Number: 571-57-00 , fits on 2 Machines Request |
| Front drilling-/milling unit ER16 for backworking
Part Number: 571-61-00 fits on 12 Machines Request |
| Cross drilling-/milling unit ER11
Part Number: 571-63-00 , fits on 10 Machines Request |
| Cross drilling-/milling unit ER20 with coolant supply (external)
Part Number: 581-51-01 fits on 4 Machines Request |
| 3-spindle front drilling-/milling unit ER16
Part Number: 661-51-00 fits on 8 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking
Part Number: 661-59-00 fits on 8 Machines Request |
| 3-Spindle front drilling-/milling unit ER16 with 2-spindle drilling-/milling unit ER11 for backworking
Part Number: 7.073.555 fits on 8 Machines Request |
| Cross drilling-/milling unit ER16
Part Number: 7.073.789 fits on 16 Machines Request |
| Front drilling-/milling unit ER11 for backworking
Part Number: 7.073.790 fits on 17 Machines Request |
| 2-spindle front drilling-/milling unit ER16
Part Number: 7.073.791 fits on 8 Machines Request |
| Cross drilling-/milling unit ER16
Part Number: 7.073.793 fits on 5 Machines Request |
| 2-spindle cross drilling-/milling unit ER16
Part Number: 7.073.794 fits on 5 Machines Request |
| Crossdrilling-/milling unit DECOFLEX®15 Part Number: 7.074.304 Also Available 183 Adapter fits on 20 Machines Request |
| 3-spindle front drilling-/milling unit DECOFLEX®15
Part Number: 7.074.700 Also Available 183 Adapter fits on 8 Machines Request |
| Front drilling-/milling unit DECOFLEX®15 for backworking
Part Number: 7.074.705 Also Available 183 Adapter fits on 15 Machines Request |
| 2-spindle front drilling-/milling unit DECOFLEX®15
Part Number: 7.074.710 Also Available 183 Adapter fits on 8 Machines Request |
| 2-spindle double front drilling-/milling unit DECOFLEX®15 for front- and backworking
Part Number: 7.074.715 Also Available 183 Adapter fits on 9 Machines Request |
| 3-spindle double front drilling-/milling unit DECOFLEX®15 for front- and backworking
Part Number: 7.074.755 Also Available 183 Adapter fits on 3 Machines Request |
| 3-spindle double front drilling-/milling unit DECOFLEX®15 for front- and backworking
Part Number: 7.074.760 Also Available 183 Adapter fits on 3 Machines Request |
| Cross drilling-/milling unit DECOFLEX®15
Part Number: 7.074.780 Also Available 183 Adapter fits on 5 Machines Request |
| 2-spindle cross drilling-/milling unit DECOFLEX®15
Part Number: 7.074.790 Also Available 183 Adapter fits on 4 Machines Request |
| 2-spindle double drilling-/milling unit DECOFLEX®15 for front- and backworking
Part Number: 7.074.800 Also Available 183 Adapter fits on 3 Machines Request |
| Cross drilling-/milling unit DECOFLEX®15 with coolant supply (external or internal)
Part Number: 7.074.810 Also Available 183 Adapter fits on 2 Machines Request |
| 2-spindle cross drilling-/milling unit DECOFLEX®15 with coolant supply (external)
Part Number: 7.074.820 Also Available 183 Adapter fits on 2 Machines Request |
| Cross drilling-/milling unit DECOFLEX®15
Part Number: 7.074.996 Also Available 183 Adapter fits on Star SR-20RII Request |
| 2-spindle double front drilling-/milling unit DECOFLEX®15 for front- and backworking with coolant supply (external)
Part Number: 7.076.130 Also Available 183 Adapter fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit DECOFLEX®15 with coolant supply (external)
Part Number: 7.076.185 Also Available 183 Adapter fits on 4 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
Part Number: 7.076.370 fits on 10 Machines Request |
| Front drilling-/milling unit DECOFLEX®15 for backworking
Part Number: 7.077.715 Also Available 183 Adapter fits on 10 Machines Request |
| Cross drilling-/milling unit ER16; stronger bearings
Part Number: 7.078.012 fits on 17 Machines Request |
| Front drilling-/milling unit ER11 for backworking
Part Number: 7.078.450 fits on 11 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
Part Number: 7.078.800 fits on 9 Machines Request |
| 2-spindle front drilling-/milling unit ER16 (reinforced version)
Part Number: 7.079.470 fits on 8 Machines Request |
| Front drilling-/milling unit DECOFLEX®15
Part Number: 7.079.624 Also Available 183 Adapter fits on 13 Machines Request |
| Front drilling-/milling unit ER11
Part Number: 7.079.850 fits on Star SW-12RII Request |
| Cross drilling-/milling unit ER16
Part Number: 7.170.086 fits on 2 Machines Request |
| 3-spindle front drilling-/milling unit ER20
Part Number: 7.170.275 fits on Star SR-38 (Type A/B) Request |
| 3-spindle front drilling-/milling unit DECOFLEX®15
Part Number: 7.170.518 Also Available 183 Adapter fits on Star SR-38 (Type A/B) Request |
| 2-spindle front drilling-/milling unit ER16 and slotting unit Ø13mm for backworking
Part Number: 7.170.810 fits on 3 Machines Request |
| 2-spindle cross drilling-/milling unit ER8 with coolant supply (external)
Part Number: 7.171.345 fits on 4 Machines Request |
| 3-spindle front drilling unit DECOFLEX®15
Part Number: 7.171.920 Also Available 183 Adapter fits on Star SB-12/20R Request |
| Sleeve holder for high speed spindle 90°; with idler shaft
Part Number: 7.173.070 fits on Star SV-20R Request |
| Cross drilling-/milling unit DECOFLEX®15 for backworking
Part Number: 7.173.080 Also Available 183 Adapter fits on 3 Machines Request |
| Cross drilling-/milling unit DECOFLEX®15 with coolant supply (external or internal)
Part Number: 7.173.088 Also Available 183 Adapter fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit DECOFLEX®15 with coolant supply (external or internal)
Part Number: 7.173.092 Also Available 183 Adapter fits on 3 Machines Request |
| 2-spindle front drilling-/milling unit DECOFLEX®15 with coolant supply (external)
Part Number: 7.173.095 Also Available 183 Adapter fits on 4 Machines Request |
| Sleeve holder for high speed spindle 32°; with idler shaft
Part Number: 7.173.220 fits on Star SV-20R Request |
| Drilling/milling unit DECOFLEX® 15
Part Number: 7.173.564 Also Available 183 Adapter fits on 3 Machines Request |
| Upgrade set for B-Axis (T17-T19) cross drilling-/milling unit DECOFLEX®15
Part Number: 7.173.698 Also Available 183 Adapter fits on Star SR-20RIV Request |
| Drill sleeve ER16 for backworking T24 and T28
Part Number: 0R1-21 , fits on Star SW-20 Request |
| Drill sleeve ER16 for backworking
Part Number: 0R1-22 fits on 9 Machines Request |
| Drill sleeve ER16 for backworking with coolant supply (internal)
Part Number: 0R1-23 , fits on 11 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 0R1-41 , fits on 10 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 0R1-42 , fits on 10 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 0R1-43 , fits on 10 Machines Request |
| Boring sleeve Ø4mm for backworking
Part Number: 0R1-47 , fits on 9 Machines Request |
| Drill sleeve ER16; shank: Ø16mm
Part Number: 101-03-00 , fits on 2 Machines Request |
| Drill sleeve ER16 for backworking
Part Number: 101-04-00 , fits on 11 Machines Request |
| Drill sleeve ER20 for backworking
Part Number: 101-05-00 , fits on 9 Machines Request |
| Boring sleeve Ø16mm for backworking
Part Number: 101-11-00 , fits on 8 Machines Request |
| Double sleeve holder Ø22mm for high speed spindle
Part Number: 101-15-00 , fits on Star SW-12RII Request |
| Triple sleeve holder for high speed spindle Ø22mm
Part Number: 101-16-00 , fits on Star SW-12RII Request |
| Drill sleeve ER11 for backworking
Part Number: 101-17-00 , fits on 2 Machines Request |
| Drill sleeve ER16 for backworking with coolant supply (internal)
Part Number: 101-18-00 , fits on 5 Machines Request |
| Drill sleeve ER20 for backworking with coolant supply (internal)
Part Number: 101-19-00 , fits on 4 Machines Request |
| Drill sleeve ER25 for backworking with coolant supply (internal)
Part Number: 101-21-00 , fits on Star SR-38 (Type A/B) Request |
| Double sleeve holder Ø32mm for deep drilling
Part Number: 101-23-00 , fits on Star SR-38 (Type A/B) Request |
| Drill sleeve ER16; shank: Ø32mm; for deep drilling with coolant supply (internal) Part Number: 101-24-00 , fits on Star SR-38 (Type A/B) Request |
| Drill sleeve ER20; shank: Ø32mm; for deep drilling with coolant supply (internal)
Part Number: 101-25-00 , fits on Star SR-38 (Type A/B) Request |
| Drill sleeve ER25; shank: Ø32mm; for deep drilling with coolant supply (internal)
Part Number: 101-26-00 , fits on Star SR-38 (Type A/B) Request |
| Tool holder with 17mm overhang; shank: 16x16mm
Part Number: 101-27-00 , fits on Star SR-38 (Type A/B) Request |
| Drill sleeve ER16; shank: Ø22mm; (long type)
Part Number: 101-28-00 , fits on Star SR-32JII-B/JIII-B Request |
| Boring sleeve Ø12mm for backworking
Part Number: 101-32-00 , fits on 10 Machines Request |
| 4-Station tool holder 12x12
DECOFLEX® 15
internal coolant through tool
Part Number: 1107673 Also Available 183 Adapter fits on Star SR-20RIV Request |
| 4-Station tool holder 12x12
DECOFLEX® 15
internal coolant through tool
Part Number: 1124996 Also Available 183 Adapter fits on Star SR-20RIV Request |
| 5-station tool holder DECOFLEX®20
Part Number: 1125001 Also Available 64 Adapter fits on Star SR-38 (Type A/B) Request |
| 5-station tool holder DECOFLEX®20
Part Number: 1126142 Also Available 64 Adapter fits on Star SD-26C/E/G/S Request |
| 4-station tool holder DECOFLEX®20 and drill chuck Ø22; with coolant supply (internal) high pressure
Part Number: 1126144 fits on Star SD-26C/E/G/S Request |
| Drill sleeve ER16 for backworking with coolant supply (internal) high pressure
Part Number: 1127158 fits on 2 Machines Request |
| Drill sleeve ER20 for backworking
Part Number: 1127159 fits on 2 Machines Request |
| wedge type tool holder; shank: 16x16mm
Part Number: 221-01-00 fits on 5 Machines Request |
| Drill sleeve ER20 for backworking
Part Number: 671-22-00 , fits on 10 Machines Request |
| 2-station tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.073.106 fits on 3 Machines Request |
| Tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.074.362 fits on 2 Machines Request |
| Cross drilling-/milling unit modification set DECOFLEX®15 T31-T33 Part Number: 7.074.777 Also Available 183 Adapter fits on Star SR-20RIII Request |
| Cut-off tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.075.034 fits on 4 Machines Request |
| Tool holder; shank: 20x20mm; with coolant supply (external)
Part Number: 7.075.035 fits on 4 Machines Request |
| 6-station tool holder (1x original; shank: 12x12mm; 5x DECOFLEX®15)
Part Number: 7.075.400 Also Available 183 Adapter fits on Star SR-20RIII Request |
| Tool holder DECOFLEX®20
Part Number: 7.075.452 Also Available 64 Adapter fits on 4 Machines Request |
| 2-station tool holder DECOFLEX®20 with coolant supply (external or internal)
Part Number: 7.075.453 Also Available 64 Adapter fits on 6 Machines Request |
| 4-station tool holder DECOFLEX®20 (1x original; shank: 16x16mm; 3x DECOFLEX)
Part Number: 7.075.454 Also Available 64 Adapter fits on Star SV-32 Request |
| 6-station tool holder (1x original; shank: 12x12mm; 4x DECOFLEX®15) with coolant supply (internal)
Part Number: 7.075.455 Also Available 183 Adapter fits on Star SR-20RII Request |
| 3-station tool holder DECOFLEX®15 with coolant supply (internal)
Part Number: 7.075.595 Also Available 183 Adapter fits on 2 Machines Request |
| 4-station tool holder DECOFLEX®20 for front- and backworking with coolant supply (internal)
Part Number: 7.076.006 Also Available 64 Adapter fits on 7 Machines Request |
| 6-station tool holder (2x original; shank: 12x12mm; 4x DECOFLEX®15) with coolant supply (internal)
Part Number: 7.076.144 Also Available 183 Adapter fits on Star SR-20RIII Request |
| 6-station tool holder DECOFLEX®15 with coolant supply (internal)
Part Number: 7.076.154 Also Available 183 Adapter fits on Star SR-20RII Request |
| Upgrade set for cross drilling-/milling unit DECOFLEX®15
Part Number: 7.076.325 Also Available 183 Adapter fits on 3 Machines Request |
| 4-station tool holder DECOFLEX®15; with coolant supply (internal)
Part Number: 7.078.092 Also Available 183 Adapter fits on 2 Machines Request |
| Tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.078.572 fits on 4 Machines Request |
| Drill sleeve DECOFLEX®15 for backworking
Part Number: 7.079.623 Also Available 183 Adapter fits on 10 Machines Request |
| 4-spindle tool holder DECOFLEX®15; with coolant supply (internal)
Part Number: 7.079.625 Also Available 183 Adapter fits on Star ECAS-12/20 Request |
| Drill sleeve DECOFLEX®15 for backworking
Part Number: 7.079.640 Also Available 183 Adapter fits on 10 Machines Request |
| Upgrade set for cross drilling-/milling unit DECOFLEX®15 T31-T33
Part Number: 7.079.940 Also Available 183 Adapter fits on Star SR-20RIII Request |
| 5-station tool holder DECOFLEX®15
Part Number: 7.170.325 Also Available 183 Adapter fits on Star SB-16D/E Request |
| Cross drilling unit modification set DECOFLEX® 15
Part Number: 7.170.326 Also Available 183 Adapter fits on Star SB-16D/E Request |
| 6-station tool holder DECOFLEX®15
Part Number: 7.170.675 Also Available 183 Adapter fits on Star SR-20RIII Request |
| 4-spindle tool holder DECOFLEX®15; with coolant supply (internal)
Part Number: 7.170.712 Also Available 183 Adapter fits on Star SR-20RIII Request |
| Sleeve holder for deep drilling DECOFLEX®20 with coolant supply (internal)
Part Number: 7.171.503 Also Available 64 Adapter fits on 4 Machines Request |
| Triple sleeve holder DECOFLEX®20 with coolant supply (external or internal)
Part Number: 7.171.505 Also Available 64 Adapter fits on 5 Machines Request |
| Drill sleeve DECOFLEX®15 for backworking
Part Number: 7.172.875 Also Available 183 Adapter fits on 7 Machines Request |
| 5-Station DECOFLEX® 20 and tool holder 16x16
Part Number: 7.173.563 Also Available 64 Adapter fits on Star SV-20 Request |
| 5-station tool holder DECOFLEX®15
Part Number: 7.173.695 Also Available 183 Adapter fits on Star SR-20RIV Request |
| 2-station tool holder DECOFLEX®15
Part Number: 7.173.696 Also Available 183 Adapter fits on Star SR-20RIV Request |
| Upgrade set for cross drilling-/milling unit (T07-T09) DECOFLEX®15
Part Number: 7.173.697 Also Available 183 Adapter fits on Star SR-20RIV Request |
| 4-station tool holder DECOFLEX®15; with coolant supply (internal)
Part Number: 7.173.699 Also Available 183 Adapter fits on 2 Machines Request |
| Cross drilling-/milling unit modification set DECOFLEX®15 T31-T33 Part Number: 7.174.570 Also Available 183 Adapter fits on Star SR-20RIII Request |
| Cross drilling-/milling unit PRECI-FLEX® ER25 with coolant supply (external)
Part Number: 7.074.872 Also Available 88 Adapter fits on 4 Machines Request |
| Skewed hole drilling-/milling unit PRECI-FLEX® ER20 (90°) with coolant supply (internal)
Part Number: 7.074.965 Also Available 55 Adapter fits on 4 Machines Request |
| Skewed hole drilling-/milling unit PRECI-FLEX® ER20 (0-90°) with coolant supply (external)
Part Number: 7.074.970 Also Available 55 Adapter fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20; 12000 1/min; with coolant supply (internal)
Part Number: 7.075.125 Also Available 55 Adapter fits on 2 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20; 12000 1/min; with coolant supply (external)
Part Number: 7.075.185 Also Available 55 Adapter fits on 2 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20; 12000 1/min; with coolant supply (internal)
Part Number: 7.075.210 Also Available 55 Adapter fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20; 12000 1/min; with coolant supply (external)
Part Number: 7.075.215 Also Available 55 Adapter fits on 4 Machines Request |
| 2-spindle front drilling-/milling unit ER11 with cross drilling-/milling unit ER11 for backworking
Part Number: 7.075.500 fits on Star ECAS-12/20 Request |
| 2-spindle front drilling-/milling unit ER20 PRECI-FLEX® for backworking with coolant supply (external)
Part Number: 7.075.580 Also Available 55 Adapter fits on 2 Machines Request |
| 2-spindle front drilling-/milling unit ER20 PRECI-FLEX® for backworking with coolant supply (internal)
Part Number: 7.075.585 Also Available 55 Adapter fits on 2 Machines Request |
| 2-Spindle cross drilling unit PRECI-FLEX ER20 9500 1/min with coolant supply (external) Part Number: 7.173.897 Also Available 55 Adapter fits on Star SX-38-B Request |
| Skewed hole drilling-/milling unit PRECI-FLEX® ER20 (0-90°) with coolant supply (external)
Part Number: 7.173.901 Also Available 55 Adapter fits on Star SX-38-B Request |
| 2-spindle cross drilling-/milling unit PRECI-FLEX® ER20 with coolant supply (external)
Part Number: 7.173.915 Also Available 55 Adapter fits on Star SX-38-B Request |
| 2-Spindle cross drilling unit PRECI-FLEX ER20 9500 1/min with coolant supply (internal) Part Number: 7.174.464 Also Available 55 Adapter fits on Star SX-38-B Request |
| 3-spindle cross drilling-/milling unit ER16
Part Number: 0G1-51 , fits on Star SB-16D/E Request |
| 4-spindle cross drilling-/milling unit ER16
Part Number: 0G1-52 , fits on Star SB-16D/E Request |
| Slotting unit Ø30xØ6mm
Part Number: 0G1-53 , fits on Star SB-16D/E Request |
| 3-spindle cross drilling-/milling unit ER16
Part Number: 0G1-54 , fits on Star SB-16D/E Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 0M1-55 fits on 8 Machines Request |
| 3-spindle double front drilling-/milling unit ER11 for front- and backworking; 10000 1/min
Part Number: 0M1-58 , fits on Star SB-12/20R Request |
| Thread whirling unit; adjustable (0°±20°)
Part Number: 0M1-71 , fits on Star SB-12/20R Request |
| Idler shaft
Part Number: 0M1-89 , fits on 7 Machines Request |
| Polygon machining unit Ø60xØ13mm
Part Number: 0M1-91 , fits on Star SB-12/20R Request |
| Polygon machining unit Ø60xØ13mm
Part Number: 0T1-91 , fits on 6 Machines Request |
| 3-spindle double front drilling-/milling unit ER11/ER8 for front- and backworking
Part Number: 101-44-00 fits on Star SL-7/10 Request |
| Polygon machining unit Ø60xØ13mm for backworking
Part Number: 101-51-00 , fits on 3 Machines Request |
| 3-spindle double front drilling-/milling unit ER11/ER8 for front- and backworking
Part Number: 101-53-00 , fits on Star SW-12RII Request |
| Slotting unit Ø50xØ13mm
Part Number: 101-55-00 , fits on Star SW-12RII Request |
| 2-spindle double front drilling-/milling unit ER11/ER8 for front- and backworking
Part Number: 101-56-00 , fits on Star SW-12RII Request |
| 2-spindle double front drilling-/milling unit ER11/ER8 for front- and backworking
Part Number: 101-57-00 , fits on Star SW-12RII Request |
| skewed hole machining unit ER11/ER8 (0-30°) for front- and backworking
Part Number: 101-58-00 , fits on Star SW-12RII Request |
| Thread whirling unit; adjustable (0°±20°)
Part Number: 101-59-00 , fits on 2 Machines Request |
| Polygon machining unit Ø50xØ13mm
Part Number: 101-61-00 , fits on Star SW-12RII Request |
| Gear hobbing unit Ø4,5mm
Part Number: 101-62-00 , fits on Star SW-12RII Request |
| Cross drilling-/milling unit ER11 for backworking
Part Number: 101-65-00 , fits on 3 Machines Request |
| 2-spindle double front drilling-/milling unit ER20/ER16 for front- and backworking
Part Number: 101-69-00 , fits on Star SR-38 (Type A/B) Request |
| Polygon machining unit Ø70xØ16mm
Part Number: 101-71-00 , fits on Star SR-38 (Type A/B) Request |
| Thread whirling unit; adjustable (0°±20°)
Part Number: 101-72-00 , fits on Star SR-38 (Type A/B) Request |
| Slotting unit Ø60xØ16mm
Part Number: 101-73-00 , fits on Star SR-38 (Type A/B) Request |
| Crossdrilling-/milling unit ER11; 20000 1/min
Part Number: 101-75-00 , fits on 10 Machines Request |
| Crossdrilling-/milling unit ER11; 20000 1/min
Part Number: 101-76-00 , fits on 13 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 101-95-00 fits on 8 Machines Request |
| Polygon machining unit Ø60xØ13mm for backworking
Part Number: 101-96-00 , fits on 2 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
Part Number: 101-97-00 , fits on 2 Machines Request |
| Slotting unit Ø50xØ13mm for backworking
Part Number: 101-99-00 , fits on 2 Machines Request |
| Gear hobbing unit ER11; ajustable (8°) for backworking
Part Number: 1103051 fits on 2 Machines Request |
| Gear hobbing unit ER11; ajustable (8°) for backworking
Part Number: 1103054 fits on Star SW-12RII Request |
| Front drilling unit ER16 for deep drilling for backworking with coolant supply (internal and external)
Part Number: 1104131 fits on 2 Machines Request |
| Thread whirling unit outer
adjustable 0°±25°
external coolant supply Part Number: 1105550 fits on Star SD-26C/E/G/S Request |
| Thread whirling unit outer
adjustable 0°±25°
external coolant supply Part Number: 1105660 fits on Star SD-26C/E/G/S Request |
| 2-spindle double front drilling-/milling unit ER20/ER16 for front- and backworking
Part Number: 1106069 fits on Star SX-38-B Request |
| Crossdrilling-/milling unit ER16
Part Number: 1124808 fits on 2 Machines Request |
| 2-spindle front drilling-/milling unit DECOFLEX®20 with coolant supply (external)
Part Number: 1126145 Also Available 64 Adapter fits on Star SD-26C/E/G/S Request |
| 2-spindle front drilling-/milling unit ER16
Part Number: 121-51-00 , fits on Star SF-25 Request |
| 2-spindle front drilling-/milling unit ER16 with coolant supply (external)
Part Number: 121-52-00 , fits on Star SF-25 Request |
| Cross drilling-/milling unit ER20
Part Number: 121-53-00 , fits on Star SF-25 Request |
| Polygon machining unit Ø50xØ13mm
Part Number: 141-62-00 , fits on Star SL-7/10 Request |
| Gear hobbing unit Ø4,5mm
Part Number: 141-63-00 , fits on Star SL-7/10 Request |
| 2-spindle front drilling-/milling unit ER16 with tilting head for B-axis
Part Number: 191-01-00 , fits on Star SV-38R Request |
| 2-spindle skewed hole machining unit ER16
Part Number: 191-02-00 , fits on Star SV-20R Request |
| Front drilling-/milling unit ER11
Part Number: 201-52-00 , fits on 5 Machines Request |
| Front tapping unit ER11
Part Number: 201-53-00 , fits on 3 Machines Request |
| double front drilling-/ milling unit ER11 for front- and backworking
Part Number: 201-56-00 fits on 5 Machines Request |
| Cross drilling-/milling unit ER16
Part Number: 221-50-00 fits on 5 Machines Request |
| Cross tapping unit ER11
Part Number: 221-51-00 fits on 3 Machines Request |
| Front tapping unit ER11
Part Number: 221-53-00 , fits on 3 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking
Part Number: 221-56-00 fits on 4 Machines Request |
| Cross drilling-/milling unit ER11; adjustable in height
Part Number: 221-57-00 , fits on Star SV-32JII Request |
| Cross tapping unit ER11; adjustable in height
Part Number: 221-59-00 , fits on Star SV-32JII Request |
| Cross drilling-/milling unit ER11 adjustable in height Part Number: 221-64-00 , fits on Star SV-32JII Request |
| Slotting unit Ø50xØ13mm
Part Number: 221-65H-00 , fits on Star SV-32JII Request |
| Cross drilling-/milling unit ER16
Part Number: 221-66-00 , fits on Star SV-32JII Request |
| Cross tapping unit ER11
Part Number: 331-51-00 , fits on 4 Machines Request |
| Polygon machining unit Ø70xØ16mm
Part Number: 341-91-00 , fits on 5 Machines Request |
| 2-spindle cross drilling-/milling unit ER16
Part Number: 421-51-00 fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit ER11; 9500 1/min
Part Number: 421-52-00 fits on 4 Machines Request |
| Slotting unit Ø50xØ13mm
Part Number: 421-54-00 , fits on 4 Machines Request |
| Skewed hole drilling-/milling unit ER11 (0-60°)
Part Number: 421-55-00 , fits on 4 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking
Part Number: 421-59-00 fits on 5 Machines Request |
| Thread whirling unit; adjustable (1°-10°)
Part Number: 421-73-00 , fits on Star SV-20 Request |
| Polygon machining unit Ø70xØ16mm
Part Number: 421-81-00 , fits on 5 Machines Request |
| 2-spindle cross drilling-/milling unit ER11 9500 1/min Part Number: 431-52-00 fits on 5 Machines Request |
| Slotting unit Ø60xØ16mm
Part Number: 431-54-00 fits on 5 Machines Request |
| Skewed hole machining unit ER11 (0-60°)
Part Number: 431-55-00 , fits on 2 Machines Request |
| Thread whirling unit; adjustable (0°±20°); with coolant supply (external)
Part Number: 431-56-00 , fits on 4 Machines Request |
| 2-spindle front drilling-/milling unit ER20 with coolant supply (external)
Part Number: 431-57-00 , fits on 4 Machines Request |
| Gear hobbbing unit Ø32x13x20mm (±3°) with coolant supply (external)
Part Number: 431-58-00 , fits on 4 Machines Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking
Part Number: 431-59-00 fits on 5 Machines Request |
| Cross drilling-/milling unit ER25 with coolant supply (external)
Part Number: 431-61-00 , fits on 4 Machines Request |
| Skewed hole drilling-/milling unit ER16 (±90°)
Part Number: 431-62-00 , fits on 5 Machines Request |
| skewed hole 2-spindle drilling-/milling unit ER11 (0±90°) for front- and backworking
Part Number: 431-63-00 , fits on 4 Machines Request |
| 2-spindle cross drilling-/milling unit ER8 12000 1/min Part Number: 451-51-00 , fits on Star SV-12 Request |
| Skewed hole machining unit ER11 (0-90°); 12.000 1/min
Part Number: 451-55-00 , fits on Star SV-12 Request |
| Skewed hole machining unit ER11 (0-90°); 12000 1/min for backworking
Part Number: 451-56-00 , fits on Star SV-12 Request |
| 2-spindle double front drilling-/milling unit ER11 for front- and backworking 12000 1/min; with coolant supply (external) Part Number: 451-59-00 fits on Star SV-20 Request |
| Polygon machining-/thread milling unit Ø70xØ16mm (±30°)
Part Number: 451-71-00 , fits on 4 Machines Request |
| Thread whirling unit; adjustable (1 - 10°); with coolant supply (external)
Part Number: 451-72-00 , fits on 3 Machines Request |
| Slotting unit Ø30xØ6mm
Part Number: 491-52-00 , fits on Star SB-16D/E Request |
| Slotting unit Ø30xØ6mm
Part Number: 491-53-00 , fits on 2 Machines Request |
| Slotting unit Ø50xØ13mm
Part Number: 541-54-00 fits on 11 Machines Request |
| Thread whirling unit; ajustable (0°±10°)
Part Number: 541-78-00 , fits on 2 Machines Request |
| Polygon machining unit Ø50xØ13mm
Part Number: 541-91-00 , fits on 3 Machines Request |
| Crossdrilling-/milling unit ER16
Part Number: 571-55-00 fits on 14 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking
Part Number: 571-56-00 , fits on 2 Machines Request |
| Cross drilling-/milling unit ER8
Part Number: 571-62-00 , fits on 2 Machines Request |
| Cross drilling-/milling unit ER16 for backworking
Part Number: 581-52-00 fits on 4 Machines Request |
| 2-spindle skewed hole machining unit (0±90°)
Part Number: 581-55-00 fits on 2 Machines Request |
| Skewed hole machining unit ER11 (0-90°) for backworking
Part Number: 581-56-00 , fits on 2 Machines Request |
| Thread whirling unit; ajustable (±10°); GLOOR type; with coolant supply (external)
Part Number: 581-71-00 , fits on 3 Machines Request |
| 2-Spindle cross drilling-/milling unit ER16 with coolant supply (external)
Part Number: 591-51-00 , fits on 2 Machines Request |
| Skewed hole drilling-/milling unit ER16 (±90°) for front- and backworking
Part Number: 591-55-00 , fits on 2 Machines Request |
| skewed hole 2-spindle drilling-/milling unit ER11 (±90°) for front- and backworking
Part Number: 591-56-00 , fits on 2 Machines Request |
| Thread whirling unit; adjustable (±20°); for front- and backworking; with coolant supply (external)
Part Number: 591-72-00 fits on 2 Machines Request |
| 3-spindle front drilling-/milling unit ER16
Part Number: 671-51-00 , fits on 3 Machines Request |
| 2-spindle front drilling-/milling unit ER16
Part Number: 671-52-00 , fits on 3 Machines Request |
| 2-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 671-58-00 , fits on 3 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 671-59-00 fits on 3 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 671-61-00 fits on 7 Machines Request |
| Polygon machining unit Ø50xØ13mm
Part Number: 671-91-00 , fits on 3 Machines Request |
| Thread whirling unit; adjustable (0° to -20°)
Part Number: 681-72-00 , fits on 11 Machines Request |
| Skewed hole machining unit ER20 (+90° to -55°)
Part Number: 7.070.370 fits on Star SV-20 Request |
| Slotting unit Ø50xØ13mm for backworking; stronger bearings
Part Number: 7.072.661 fits on 5 Machines Request |
| Slotting unit Ø20xØ5mm for backworking ajustable in height (±16mm) Part Number: 7.072.700 fits on Star SR-10J Request |
| Slotting unit Ø45xØ10mm for backworking (i=1,8:1)
Part Number: 7.072.701 fits on 7 Machines Request |
| Slotting unit Ø30xØ8mm for backworking (i=1,8:1)
Part Number: 7.072.720 fits on 7 Machines Request |
| 3-Spindle front drilling-/milling unit ER11 and cross drilling-/milling unit ER8 for backworking
Part Number: 7.072.831 fits on Star SR-10J Request |
| Slotting unit Ø30xØ6mm for backworking
Part Number: 7.072.855 fits on 17 Machines Request |
| Cross drilling-/milling unit ER20
Part Number: 7.072.940 fits on Star SV-32 Request |
| 2-spindle double front drilling-/milling unit ER16 for front- and backworking
Part Number: 7.072.941 fits on Star SV-32 Request |
| Cross drilling-/milling unit ER20
Part Number: 7.072.950 fits on 15 Machines Request |
| Cross drilling-/milling unit ER11 for backworking
Part Number: 7.072.970 fits on 3 Machines Request |
| Skewed hole machining unit ER11 (360°)
Part Number: 7.073.081 fits on 10 Machines Request |
| Cross drilling-/milling unit ER20
Part Number: 7.073.160 fits on 5 Machines Request |
| 2-spindle skewed hole machining unit ER11 (360°)
Part Number: 7.073.190 fits on 9 Machines Request |
| Milling unit for backworking for ph HORN tools
Part Number: 7.073.200 fits on 5 Machines Request |
| double front drilling-/ milling unit ER16 for front- and backworking
Part Number: 7.073.210 fits on 3 Machines Request |
| 3-Spindle front drilling-/milling unit ER8 with cross drilling-/milling unit ER8 for backworking
Part Number: 7.073.290 fits on Star SR-10J Request |
| Slotting unit Ø30xØ8mm attached on cross drilling-/milling unit ER16
Part Number: 7.073.300 fits on 2 Machines Request |
| Cross drilling-/milling unit ER11 for backworking
Part Number: 7.073.320 fits on 2 Machines Request |
| Slotting unit Ø30xØ8mm attached on cross drilling-/milling unit ER11
Part Number: 7.073.350 fits on 2 Machines Request |
| double front drilling-/ milling unit ER16 for front- and backworking
Part Number: 7.073.530 fits on 3 Machines Request |
| 2-spindle double front drilling-/milling unit ER16 for front- and backworking
Part Number: 7.073.550 fits on Star SV-20 Request |
| Skewed hole drilling-/milling unit ER16 (180°)
Part Number: 7.073.560 fits on 5 Machines Request |
| Front drilling unit ER16 for deep drilling with coolant supply (internal and external)
Part Number: 7.073.565 fits on 5 Machines Request |
| Thread whirling unit; adjustable (1°-15°); SCHWANOG type No. 191428
Part Number: 7.073.590 fits on Star SV-32 Request |
| Front drilling-/milling unit ER16 for backworking; stronger bearings
Part Number: 7.073.655 fits on 2 Machines Request |
| Front drilling unit ER16 for deep drilling with coolant supply (internal)
Part Number: 7.073.660 fits on 4 Machines Request |
| Thread whirling unit; adjustable (1°-15°); for backworking; SCHWANOG type No. 191482
Part Number: 7.073.670 fits on 2 Machines Request |
| 2-Spindle double front drilling unit ER20 for front- and backworking
Part Number: 7.073.720 fits on Star SV-32 Request |
| Gear hobbing unit; Ø10mm; adjustable (±20°)
Part Number: 7.073.740 fits on 5 Machines Request |
| Thread whirling unit adjustable (1°-15°); SCHWANOG type No. 191428 Part Number: 7.073.765 fits on 2 Machines Request |
| Skewed hole machining unit ER16 (180°)
Part Number: 7.073.770 fits on Star SV-32 Request |
| 2-spindle front drilling-/milling unit ER20 PRECI-FLEX®
Part Number: 7.073.780 fits on 3 Machines Request |
| Cross drilling-/milling unit ER16
Part Number: 7.073.792 fits on 5 Machines Request |
| Gear hobbing unit Ø8mm
Part Number: 7.073.800 fits on 7 Machines Request |
| Slotting unit Ø50xØ13mm for backworking; stronger bearings
Part Number: 7.073.805 fits on 2 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking; 18000 1/min
Part Number: 7.073.830 fits on 11 Machines Request |
| double front drilling-/milling unit ER11 for front- and backworking; 18000 1/min
Part Number: 7.073.840 fits on 5 Machines Request |
| Front drilling unit ER16 for deep drilling for backworking with coolant supply (internal)
Part Number: 7.073.860 fits on 4 Machines Request |
| Gear hobbing unit Ø10mm (±20°); i=23:16
Part Number: 7.073.885 fits on 3 Machines Request |
| Cross drilling-/milling unit ER16 with coolant supply (external or internal)
Part Number: 7.073.895 fits on 2 Machines Request |
| 2-spindle front drilling-/milling unit ER11 with cross drilling-/milling unit ER11 for backworking
Part Number: 7.073.900 fits on Star ECAS-12/20 Request |
| 2-spindle front drilling-/milling unit ER16 with coolant supply (external or internal)
Part Number: 7.073.905 fits on 2 Machines Request |
| 2-spindle skewed hole machining unit ER16 with coolant supply (external or internal)
Part Number: 7.073.915 fits on 2 Machines Request |
| Front drilling-/milling unit ER11; with coolant supply (external); 40000 1/min
Part Number: 7.073.945 fits on 2 Machines Request |
| 3-spindle double front drilling-/milling unit ER16/ER11 for front- and backworking
Part Number: 7.074.006 fits on 3 Machines Request |
| Cross drilling-/milling unit ER11
Part Number: 7.074.038 fits on 5 Machines Request |
| Polygon machining unit Ø98xØ16mm
Part Number: 7.074.060 fits on 3 Machines Request |
| Thread whirling unit; adjustable (1°-20°); SCHWANOG type No. 194346
Part Number: 7.074.191 fits on 10 Machines Request |
| Slotting unit Ø50xØ13mm Part Number: 7.074.230 fits on 3 Machines Request |
| Slotting unit Ø56xØ13mm
Part Number: 7.074.310 fits on 8 Machines Request |
| Cross drilling-/milling unit ER11; 16000 1/min; 6mm off-center
Part Number: 7.074.470 fits on 9 Machines Request |
| skewed hole drilling-/milling unit ER16 (±90°) for front- and backworking; with coolant supply (external)
Part Number: 7.074.815 fits on 2 Machines Request |
| 2-spindle front drilling-/milling unit DECOFLEX®15 with coolant supply (external)
Part Number: 7.074.830 Also Available 183 Adapter fits on 2 Machines Request |
| Front drilling unit Ø12mm Weldon for deep drilling with coolant supply (internal)
Part Number: 7.074.835 fits on 5 Machines Request |
| 2-spindle skewed hole drilling-/milling unit ER11 (0±90°) with coolant supply (external)
Part Number: 7.074.890 fits on 4 Machines Request |
| 2-spindle skewed hole drilling-/milling unit ER11 with coolant supply (external or internal)
Part Number: 7.075.020 fits on 4 Machines Request |
| 2-spindle front drilling-/milling unit ER16 with coolant supply (external)
Part Number: 7.075.070 fits on 2 Machines Request |
| double front drilling-/ milling unit ER11 for front- and backworking; 18000 1/min
Part Number: 7.075.105 fits on 5 Machines Request |
| Slotting unit Ø80xØ13m (i=2,666:1)
Part Number: 7.075.160 fits on 8 Machines Request |
| 2-spindle skewed hole machining unit ER11 (360°); spindle 1 with coolant supply (internal)
Part Number: 7.075.195 fits on 7 Machines Request |
| Front drilling unit ER16 for deep drilling for backworking with coolant supply (internal)
Part Number: 7.075.350 fits on 3 Machines Request |
| Thread whirling unit; adjustable (±20°) with coolant supply (external)
Part Number: 7.075.360 fits on 2 Machines Request |
| Slotting unit Ø63xØ16mm; angle adjustable for backworking
Part Number: 7.075.395 fits on 3 Machines Request |
| Thread whirling unit; adjustable (0°±15°); GLOOR type
Part Number: 7.075.435 fits on 2 Machines Request |
| Front drilling-/milling unit ER11 for backworking; stronger bearings
Part Number: 7.075.495 fits on 16 Machines Request |
| 2-spindle cross drilling-/milling unit ER11 for backworking
Part Number: 7.075.510 fits on Star ECAS-12/20 Request |
| Front drilling unit ER16 for deep drilling for backworking; 18000 1/min; with coolant supply (internal)
Part Number: 7.075.535 fits on 2 Machines Request |
| Front drilling unit ER16 for deep drilling; 18000 1/min with coolant supply (internal)
Part Number: 7.075.536 fits on 4 Machines Request |
| Front drilling-/milling unit ER16 for T33
Part Number: 7.075.625 fits on 2 Machines Request |
| Cross drilling-/milling unit ER11 for backworking; heigh adjustible
Part Number: 7.075.655 fits on 13 Machines Request |
| 4-spindle front drilling-/milling unit ER11 for backworking
Part Number: 7.075.935 fits on 3 Machines Request |
| Slotting unit Ø50xØ13mm for backworking
Part Number: 7.076.165 fits on 10 Machines Request |
| Thread whirling unit; adjustable (0°±20°); for backworking; SCHWANOG type No. 194346
Part Number: 7.076.225 fits on Star SW-20 Request |
| Cross drilling-/milling unit ER16; 24000 1/min; with coolant supply (external)
Part Number: 7.076.360 fits on Star SF-25 Request |
| Slotting unit Ø50xØ6mm
Part Number: 7.076.365 fits on 10 Machines Request |
| Idler shaft
Part Number: 7.076.740 fits on Star SW-20 Request |
| Gear hobbing unit ER11; ajustable (8°) for backworking
Part Number: 7.077.371 fits on Star SR-10J Request |
| 2-spindle cross drilling-/milling unit ER16
Part Number: 7.077.440 fits on 5 Machines Request |
| Thread whirling unit; ajustable (±10°); GLOOR type; with coolant supply (external)
Part Number: 7.077.526 fits on Star SV-32 Request |
| Slotting unit Ø80xØ22mm
Part Number: 7.077.570 fits on 5 Machines Request |
| 2-spindle front drilling-/milling unit ER11 with cross drilling-/milling unit ER8 for backworking
Part Number: 7.077.730 fits on Star SR-10J Request |
| Milling unit for backworking; cutter arbor: Ø28mm
Part Number: 7.077.965 fits on 15 Machines Request |
| Cross drilling-/milling unit ER8
Part Number: 7.078.122 fits on 9 Machines Request |
| Slotting unit Ø50xØ10mm for backworking
Part Number: 7.078.150 fits on 10 Machines Request |
| Slotting unit Ø80xØ16mm
Part Number: 7.078.290 fits on 9 Machines Request |
| 2-spindle front drilling-/milling unit ER16 with coolant supply (internal)
Part Number: 7.078.325 fits on 8 Machines Request |
| Slotting unit Ø50xØ13mm Part Number: 7.078.338 fits on 3 Machines Request |
| Slotting unit Ø32xØ8mm for backworking
Part Number: 7.079.230 fits on 10 Machines Request |
| Thread whirling unit; adjustable (0°±20°); SCHWANOG type no. 267627; with coolant supply (external)
Part Number: 7.079.255 fits on 2 Machines Request |
| Crossdrilling-/milling unit DECOFLEX®15
Part Number: 7.079.619 Also Available 183 Adapter fits on 20 Machines Request |
| Gear hobbing unit Ø8mm
Part Number: 7.079.645 fits on 2 Machines Request |
| Gear hobbing unit Ø13mm; adjustable (±5°)
Part Number: 7.079.815 fits on 2 Machines Request |
| Cross drilling-/milling unit ER11; 20000 1/min; 16mm off-center
Part Number: 7.079.845 fits on Star SW-12RII Request |
| Slotting unit Ø60xØ16mm
Part Number: 7.170.305 fits on Star SR-38 (Type A/B) Request |
| 2-spindle cross drilling unit DECOFLEX®15
Part Number: 7.170.355 Also Available 183 Adapter fits on 2 Machines Request |
| Slotting unit Ø30xØ8mm attached on cross drilling unit ER11
Part Number: 7.170.365 fits on Star SB-16D/E Request |
| Thread whirling unit; adjustable (±24°); SCHWANOG type no.291723; with coolant supply (external)
Part Number: 7.170.882 fits on 2 Machines Request |
| Slotting unit Ø50xØ10mm
Part Number: 7.170.912 fits on 11 Machines Request |
| Milling unit for backworking for ph HORN interface M117
Part Number: 7.170.942 fits on 15 Machines Request |
| Slotting unit Ø30xØ5mm for backworking
Part Number: 7.170.995 fits on 17 Machines Request |
| Gear hobbing modification set for cutter arbor Ø13mm with counter bearing
Part Number: 7.171.425 fits on Star SR-38 (Type A/B) Request |
| 2-spindle front drilling unit ER16 for deep drilling with coolant supply (internal)
Part Number: 7.171.746 fits on 3 Machines Request |
| Gear hobbing unit Ø8mm
Part Number: 7.171.760 fits on 5 Machines Request |
| Thread whirling unit; adjustable (1°-20°); SCHWANOG type No. 194346; for backworking
Part Number: 7.171.885 fits on Star SW-20 Request |
| Thread whirling unit; adjustable (0°±20°)
Part Number: 7.172.380 fits on 13 Machines Request |
| Gear hobbing unit Ø8mm
Part Number: 7.172.820 fits on 2 Machines Request |
| Gear hobbing unit Ø8mm; adjustible ±5°
Part Number: 7.172.950 fits on 5 Machines Request |
| 2-spindle cross drilling-/milling unit DECOFLEX®15 with coolant supply (external or internal)
Part Number: 7.173.086 Also Available 183 Adapter fits on 2 Machines Request |
| Slotting unit Ø60xØ16mm
Part Number: 7.173.898 fits on Star SX-38-B Request |
| 2-Spindle counter face skewed hole machining unit ER16 (0-90°) with coolant supply (external)
Part Number: 7.173.902 fits on Star SX-38-B Request |
| Slotting unit Ø63xØ10mm for backworking (i=1,8:1)
Part Number: 7.174.815 fits on 12 Machines Request |
| 6-station tool holder; shank: 12x12mm
Part Number: 0G1-01 , fits on Star SB-16D/E Request |
| Tool holder with 15mm overhang; shank: 12x12mm
Part Number: 0G1-02 , fits on 3 Machines Request |
| 7-station tool holder; shank: 10x10mm
Part Number: 0G1-03 , fits on Star SB-16D/E Request |
| 6-station tool holder; shank: 12x12mm
Part Number: 0M1-03 , fits on Star SB-12/20R Request |
| 7-station tool holder; shank: 10x10mm
Part Number: 0M1-04 , fits on Star SB-12/20R Request |
| 4-station sleeve holder Ø22mm
Part Number: 0M1-11 , fits on Star SB-12/20R Request |
| Drill sleeve ER20 for backworking
Part Number: 101-01-00 fits on 3 Machines Request |
| Drill sleeve ER25 for backworking
Part Number: 101-02-00 , fits on 3 Machines Request |
| Boring sleeve Ø4mm for backworking
Part Number: 101-06-00 , fits on 11 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 101-07-00 , fits on 11 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 101-08-00 , fits on 11 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 101-09-00 , fits on 11 Machines Request |
| Drill sleeve ER25; shank: Ø32mm
Part Number: 101-22-00 , fits on Star SR-38 (Type A/B) Request |
| Drill sleeve ER25 for backworking with coolant supply (internal)
Part Number: 101-39-00 , fits on Star SX-38-A Request |
| Drill sleeve ER20 for backworking with coolant supply (internal)
Part Number: 101-41-00 , fits on Star SX-38-A Request |
| 4-station sleeve holder Ø16mm
Part Number: 101-42-00 , fits on Star SL-7/10 Request |
| Triple sleeve holder Ø25mm for high speed spindle
Part Number: 1103292 fits on 6 Machines Request |
| 2-station tool holder DECOFLEX®20 high pressure Part Number: 1126141 Also Available 64 Adapter fits on Star SD-26C/E/G/S Request |
| Cut-off tool holder; shank: 16x16mm; with stopper (1 piece standard on machine)
Part Number: 121-01-00 , fits on Star SF-25 Request |
| 2-station tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 121-02-00 , fits on 3 Machines Request |
| 2-station tool holder; shank: 16x16mm; for backworking with coolant supply (external)
Part Number: 121-03-00 , fits on 3 Machines Request |
| Triple sleeve holder Ø32mm
Part Number: 121-04-00 , fits on Star SF-25 Request |
| Triple sleeve holder Ø22mm
Part Number: 121-05-00 , fits on Star SF-25 Request |
| 7-station tool holder; shank: 12x12mm
Part Number: 1B1-01-00 , fits on Star SV-20R Request |
| 6-station tool holder; shank: 16x16mm
Part Number: 1B1-02-00 , fits on Star SV-20R Request |
| 6-station tool holder; shank: 12x12mm
Part Number: 1W1-06-00 , fits on Star SB-16III Request |
| 6-station tool holder; shank: 10x10mm
Part Number: 1W1-08-00 , fits on Star SB-16III Request |
| Tool holder with 15mm overhang; shank: 16x16mm
Part Number: 221-02-00 fits on 3 Machines Request |
| tool holder; shank: 16x16mm; adjustable in height
Part Number: 221-03-00 fits on 3 Machines Request |
| Tool holder with 15mm overhang; shank: 16x16mm
Part Number: 221-04-00 fits on Star SV-32JII Request |
| tool holder; shank: 16x16mm; adjustible in height and length
Part Number: 221-05-00 fits on Star SV-32JII Request |
| Tool holder; shank: 16x16mm; for inverse turning direction
Part Number: 221-07-00 , fits on 5 Machines Request |
| tool holder; shank: 16x16mm; for inverse turning direction; adjustable in height
Part Number: 221-08-00 fits on 4 Machines Request |
| Wedge type tool holder; shank: 16x16mm; adjustable in height (with wedge) and length
Part Number: 221-09-00 , fits on Star SV-32JII Request |
| Sleeve holder Ø22mm
Part Number: 221-10-00 fits on 3 Machines Request |
| Sleeve holder for deep drilling Ø22mm
Part Number: 221-11-00 fits on 4 Machines Request |
| Double sleeve holder Ø22mm
Part Number: 221-12-00 fits on 2 Machines Request |
| Sleeve holder Ø22mm; adjustable
Part Number: 221-14-00 , fits on Star SV-32JII Request |
| tool holder; shank: 16x16mm; for backworking; adjustable in height
Part Number: 221-72-00 , fits on 4 Machines Request |
| 6-station tool holder; shank: 10x10mm
Part Number: 2A1-03-00 , fits on Star SL-7/10 Request |
| 6-station tool holder; shank: 8x8mm
Part Number: 2A1-04-00 , fits on Star SL-7/10 Request |
| Drill sleeve ER11; shank: Ø22mm
Part Number: 301-21-00 , fits on 10 Machines Request |
| Drill sleeve ER11; shank: Ø22mm; for deep drilling
Part Number: 301-22-00 , fits on 11 Machines Request |
| double drill sleeve ER11; shank: Ø22mm; for front- and backworking
Part Number: 301-23-00 , fits on 6 Machines Request |
| Drill sleeve ER16; shank: Ø22mm
Part Number: 301-24-00 , fits on 23 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 301-25-00 , fits on 24 Machines Request |
| Tap sleeve ER11; shank: Ø22mm
Part Number: 301-31-00 , fits on 5 Machines Request |
| Tap sleeve ER16; shank: Ø22mm
Part Number: 301-33-00 , fits on 4 Machines Request |
| Thread die sleeve Ø20mm; shank: Ø22mm
Part Number: 301-36-00 , fits on 3 Machines Request |
| Thread die sleeve Ø25mm; shank: Ø22mm
Part Number: 301-37-00 , fits on 5 Machines Request |
| Boring sleeve Ø6mm; shank: Ø22mm
Part Number: 301-41-00 , fits on 22 Machines Request |
| Boring sleeve Ø8mm; shank: Ø22mm
Part Number: 301-42-00 , fits on 22 Machines Request |
| Boring sleeve Ø10mm; shank: Ø22mm
Part Number: 301-43-00 , fits on 22 Machines Request |
| Tool holder with 20mm overhang; shank: 12x12mm
Part Number: 311-01-00 , fits on 2 Machines Request |
| Tool holder with 17mm overhang; shank: 16x16mm
Part Number: 331-01-00 fits on 4 Machines Request |
| Drill sleeve ER20; shank: Ø22mm
Part Number: 331-21-00 , fits on 15 Machines Request |
| Tap sleeve ER16; shank: Ø22mm
Part Number: 331-31-00 , fits on 2 Machines Request |
| Drill sleeve T7; shank: Ø22mm; (Schaublin F10-86)
Part Number: 401-24-00 , fits on 6 Machines Request |
| Thread die sleeve Ø20mm; shank: Ø22mm
Part Number: 401-36-00 , fits on 5 Machines Request |
| Thread die sleeve Ø16mm; shank: Ø22mm
Part Number: 411-36-00 , fits on 4 Machines Request |
| Boring sleeve Ø4mm; shank: Ø22mm
Part Number: 411-41-00 , fits on 6 Machines Request |
| 5-station tool holder; shank: 12x12mm
Part Number: 421-01-00 , fits on 2 Machines Request |
| 3-station tool holder; shank: 12x12mm
Part Number: 421-02-00 , fits on 3 Machines Request |
| 3-station tool holder; shank: 12x12mm; for backworking
Part Number: 421-03-00 , fits on 3 Machines Request |
| 4-station tool holder; shank: 16x16mm
Part Number: 421-04-00 , fits on 4 Machines Request |
| Triple sleeve holder Ø32mm
Part Number: 421-11-00 , fits on 5 Machines Request |
| Triple sleeve holder Ø22mm
Part Number: 421-12-00 , fits on 5 Machines Request |
| double drill sleeve ER20; shank: Ø32mm; (short type) for front- and backworking
Part Number: 421-21-00 , fits on 12 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (short type) for front- and backworking
Part Number: 421-22-00 , fits on 23 Machines Request |
| double drill sleeve ER20; shank: Ø32mm; (long type) for front- and backworking
Part Number: 421-26-00 , fits on 12 Machines Request |
| double drill sleeve ER16; shank: Ø22mm; (long type) for front- and backworking
Part Number: 421-27-00 , fits on 23 Machines Request |
| double tap sleeve ER16; shank: Ø32mm; for front- and backworking
Part Number: 421-31-00 , fits on 4 Machines Request |
| double tap sleeve ER16; shank: Ø22mm; for front- and backworking
Part Number: 421-32-00 , fits on 10 Machines Request |
| 2-station tool holder; shank: 16x16mm
Part Number: 431-02-00 fits on 2 Machines Request |
| 2-station tool holder; shank: 16x16mm; for backworking
Part Number: 431-03-00 fits on 2 Machines Request |
| Tool holder; shank: 20x20mm; with coolant supply (external)
Part Number: 431-04-00 , fits on 4 Machines Request |
| 2-station tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 431-05-00 , fits on 3 Machines Request |
| Tool holder; shank: 20x20mm
Part Number: 431-06-00 , fits on 4 Machines Request |
| Cut-off tool holder; shank: 16x16mm
Part Number: 431-07-00 , fits on 4 Machines Request |
| 2-station tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 431-09-00 , fits on 2 Machines Request |
| Triple sleeve holder Ø32mm
Part Number: 431-11-00 , fits on 5 Machines Request |
| Triple sleeve holder Ø22mm
Part Number: 431-12-00 , fits on 4 Machines Request |
| Drill sleeve ER20; shank: Ø32mm
Part Number: 431-13-00 , fits on 6 Machines Request |
| Tool holder; shank: 16x16mm
Part Number: 441-01-00 , fits on Star SV-32JII Request |
| Sleeve holder Ø32mm for front- and backworking
Part Number: 441-11-00 , fits on 3 Machines Request |
| Double sleeve holder Ø22mm
Part Number: 441-12-00 , fits on Star SV-32JII Request |
| Sleeve holder for deep drilling Ø32mm
Part Number: 441-14-00 , fits on Star SV-32JII Request |
| Triple sleeve holder Ø22mm with coolant supply (external)
Part Number: 451-11-00 , fits on Star SV-12 Request |
| Sleeve holder for deep drilling Ø22mm
Part Number: 451-12-00 , fits on Star SV-12 Request |
| Sleeve holder for deep drilling Ø22mm
Part Number: 451-14-00 , fits on Star SV-12 Request |
| sleeve holder for deep drilling Ø22mm for backworking
Part Number: 451-18-00 , fits on Star SV-12 Request |
| Drill sleeve ER20; shank: Ø22mm
Part Number: 451-21-00 , fits on 5 Machines Request |
| Drill sleeve ER20; shank: Ø22mm
Part Number: 451-22-00 , fits on 4 Machines Request |
| double drill sleeve E16/ER11; shank: Ø22mm; for front- and backworking
Part Number: 461-21-00 , fits on 5 Machines Request |
| double tap sleeve ER11; shank: Ø22mm; for front- and backworking
Part Number: 461-31-00 fits on 3 Machines Request |
| 5-station tool holder; shank: 12x12mm
Part Number: 481-01-00 , fits on 2 Machines Request |
| 6-station tool holder; shank: 12x12mm
Part Number: 481-02-00 , fits on 2 Machines Request |
| Tool holder with 15mm overhang; shank: 12x12mm
Part Number: 481-03-00 , fits on 3 Machines Request |
| 6-station tool holder; shank: 10x10mm
Part Number: 481-04-00 , fits on 2 Machines Request |
| Tool holder with 15mm overhang; shank: 10x10mm
Part Number: 481-05-00 , fits on 5 Machines Request |
| 6-station tool holder; shank: 12x12mm
Part Number: 541-01-00 , fits on Star SR-20RII Request |
| Tool holder with 15mm overhang; shank: 12x12mm
Part Number: 541-03-00 fits on Star SR-20RII Request |
| Drill sleeve ER16 for backworking
Part Number: 541-21-00 , fits on 16 Machines Request |
| Tap sleeve ER16; shank: Ø22mm
Part Number: 541-31-00 , fits on 5 Machines Request |
| Tap sleeve ER16 for backworking
Part Number: 541-32-00 , fits on 5 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 541-71-00 , fits on 16 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 541-72-00 , fits on 16 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 541-73-00 , fits on 16 Machines Request |
| 2-station tool holder; shank: 12x12mm
Part Number: 571-01-00 , fits on Star ECAS-12/20 Request |
| 2-station tool holder; shank: 16x16mm
Part Number: 571-02-00 , fits on Star ECAS-12/20 Request |
| 4-station tool holder; shank: 12x12mm
Part Number: 571-03-00 , fits on Star ECAS-12/20 Request |
| 4-station tool holder; shank: 16x16mm
Part Number: 571-04-00 , fits on Star ECAS-12/20 Request |
| 2-station tool holder; shank: 10x10mm
Part Number: 571-05-00 , fits on Star ECAS-12/20 Request |
| 4-station tool holder; shank: 10x10mm
Part Number: 571-06-00 , fits on Star ECAS-12/20 Request |
| Boring sleeve Ø4mm for backworking
Part Number: 571-71-00 , fits on 14 Machines Request |
| Idler shaft
Part Number: 571-89-00 , fits on 5 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external)
Part Number: 581-11-00 , fits on 5 Machines Request |
| Triple sleeve holder Ø32mm with coolant supply (external)
Part Number: 581-12-00 , fits on 5 Machines Request |
| Sleeve holder for deep drilling Ø32mm with coolant supply (internal)
Part Number: 581-13-00 , fits on 6 Machines Request |
| Sleeve holder for deep drilling Ø32mm with coolant supply (internal)
Part Number: 581-14-00 , fits on 4 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external or internal)
Part Number: 581-15-00 , fits on 3 Machines Request |
| Triple sleeve holder Ø32mm with coolant supply (external or internal)
Part Number: 581-16-00 , fits on 3 Machines Request |
| Drill sleeve ER16; shank: Ø32mm; with coolant supply (internal)
Part Number: 581-21-00 , fits on 4 Machines Request |
| Drill sleeve ER20; shank: Ø32mm; for deep drilling with coolant supply (internal)
Part Number: 581-22-00 , fits on 4 Machines Request |
| Drill sleeve ER25; shank: Ø32mm; with coolant supply (internal)
Part Number: 581-23-00 , fits on 4 Machines Request |
| Drill sleeve MT1; shank: Ø32mm; with coolant supply (internal)
Part Number: 581-24-00 , fits on 4 Machines Request |
| Drill sleeve MT2; shank: Ø32mm; with coolant supply (internal)
Part Number: 581-25-00 , fits on 4 Machines Request |
| Drill sleeve ER20; shank: Ø32mm; for deep drilling
Part Number: 581-26-00 , fits on 8 Machines Request |
| Boring sleeve Ø6mm for backworking
Part Number: 581-72-00 , fits on 3 Machines Request |
| Boring sleeve Ø8mm for backworking
Part Number: 581-73-00 , fits on 3 Machines Request |
| Boring sleeve Ø10mm for backworking
Part Number: 581-74-00 , fits on 3 Machines Request |
| Boring sleeve Ø12mm for backworking
Part Number: 581-75-00 , fits on 3 Machines Request |
| Boring sleeve Ø16mm for backworking
Part Number: 581-76-00 , fits on 3 Machines Request |
| Cut off tool holder; shank: 16x16mm
Part Number: 591-01-00 , fits on 2 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external)
Part Number: 591-11-00 , fits on 3 Machines Request |
| Sleeve holder Ø22mm with coolant supply (internal)
Part Number: 591-12-00 , fits on 2 Machines Request |
| Sleeve holder for deep drilling Ø22mm with coolant supply (internal)
Part Number: 591-14-00 , fits on 2 Machines Request |
| Tool holder with 17mm overhang; shank: 16x16mm
Part Number: 671-01-00 , fits on 3 Machines Request |
| Drill sleeve ER20; shank: Ø32mm
Part Number: 671-21-00 , fits on 8 Machines Request |
| Drill sleeve ER16; shank: Ø22mm
Part Number: 671-23-00 , fits on 8 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 671-24-00 , fits on 8 Machines Request |
| Drill sleeve ER20; shank: Ø32mm; for deep drilling
Part Number: 671-25-00 , fits on 8 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; with coolant supply (internal)
Part Number: 671-26-00 , fits on 10 Machines Request |
| Drill sleeve ER16 for backworking with coolant supply (internal)
Part Number: 671-27-00 , fits on 11 Machines Request |
| Boring sleeve Ø12mm; shank: Ø22mm
Part Number: 671-44-00 , fits on 5 Machines Request |
| Boring sleeve Ø16mm; shank: Ø32mm
Part Number: 671-45-00 , fits on 10 Machines Request |
| Boring sleeve Ø12mm for backworking
Part Number: 671-74-00 , fits on 2 Machines Request |
| Boring sleeve Ø16mm for backworking
Part Number: 671-75-00 , fits on 2 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 681-21-00 , fits on 2 Machines Request |
| Tool holder with 11mm overhang; shank: 8x8mm
Part Number: 691-02-00 , fits on 2 Machines Request |
| Drill sleeve ER11; shank: Ø16mm
Part Number: 691-21-00 , fits on 3 Machines Request |
| double drill sleeve ER11; shank: Ø16mm; for front- and backworking
Part Number: 691-22-00 , fits on 3 Machines Request |
| Drill sleeve ER11 for backworking
Part Number: 691-24-00 , fits on Star SR-10J Request |
| Drill sleeve ER11 for backworking
Part Number: 691-25-00 , fits on 2 Machines Request |
| Boring sleeve Ø4mm; shank: Ø16mm
Part Number: 691-41-00 , fits on 3 Machines Request |
| Boring sleeve Ø6mm; shank: Ø16mm
Part Number: 691-42-00 , fits on 3 Machines Request |
| 4-station sleeve holder Ø22mm for deep drilling
Part Number: 7.072.827 fits on Star SR-20RII Request |
| Sleeve holder Ø22 for high speed spindle; adjustable (NSK 90° RA-100); for backworking
Part Number: 7.073.101 fits on Star SR-10J Request |
| Sleeve holder for deep drilling Ø20mm with coolant supply (internal)
Part Number: 7.073.109 fits on 4 Machines Request |
| Triple cross drilling sleeve holder Ø20mm for high speed spindle
Part Number: 7.073.295 fits on Star SR-10J Request |
| 2-station tool holder; shank: 16x16mm; for front- and backworking
Part Number: 7.073.314 fits on 2 Machines Request |
| Double sleeve holder Ø22mm for high speed spindle
Part Number: 7.073.375 fits on 8 Machines Request |
| Double sleeve holder Ø25mm for high speed spindle
Part Number: 7.073.376 fits on 8 Machines Request |
| Sleeve holder for deep drilling Ø10mm with coolant supply (internal and external)
Part Number: 7.073.552 fits on 3 Machines Request |
| Sleeve holder for deep drilling Ø10mm for backworking
Part Number: 7.073.595 fits on 10 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
Part Number: 7.073.643 fits on 3 Machines Request |
| Sleeve holder for deep drilling Ø10mm
Part Number: 7.073.762 fits on 11 Machines Request |
| Double sleeve holder Ø22mm and Ø25mm for high speed spindle
Part Number: 7.073.856 fits on 8 Machines Request |
| triple sleeve holder for high speed spindle Ø22mm; angle-adjustable
Part Number: 7.073.990 fits on Star SB-16C Request |
| Sleeve holder for deep drilling Ø32mm
Part Number: 7.074.008 fits on 4 Machines Request |
| 6-station tool holder; shank: 16x16mm
Part Number: 7.074.180 fits on 2 Machines Request |
| Sleeve holder Ø30mm
Part Number: 7.074.275 fits on 2 Machines Request |
| Sleeve holder for deep drilling Ø30mm with coolant supply (internal)
Part Number: 7.074.280 fits on 2 Machines Request |
| Special sleeve ER20 for 7.074.275 or 7.074.280
Part Number: 7.074.315 fits on 2 Machines Request |
| Cut-off tool holder; shank: 12x12mm; with coolant supply (external)
Part Number: 7.074.384 fits on 2 Machines Request |
| 3-station tool holder; 12x12mm; with coolant supply (external)
Part Number: 7.074.385 fits on 3 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external or internal)
Part Number: 7.074.495 fits on 3 Machines Request |
| 3-station tool holder; shank: 12,7x12,7mm; with coolant supply (external)
Part Number: 7.074.540 fits on Star ECAS-32T Request |
| 6-station tool holder; shank: 10x10mm
Part Number: 7.074.590 fits on Star SR-10J Request |
| Double sleeve holder Ø25mm for high speed spindle
Part Number: 7.074.650 fits on 9 Machines Request |
| Boring sleeve Ø14mm; shank: Ø22mm
Part Number: 7.074.730 fits on 2 Machines Request |
| Cut-off tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.074.905 fits on 3 Machines Request |
| Sleeve holder for deep drilling Ø32mm with coolant supply (internal)
Part Number: 7.075.000 fits on 4 Machines Request |
| Cut-off tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.075.492 fits on 2 Machines Request |
| 2-station tool holder; shank: 12x12mm
Part Number: 7.075.520 fits on 5 Machines Request |
| Tool holder height and angular adjustable system: STAR POSALUX for backworking
Part Number: 7.075.560 fits on Star SR-10J Request |
| Triple sleeve holder Ø22mm
Part Number: 7.075.795 fits on 9 Machines Request |
| 4-station sleeve holder Ø22mm under T11-T14
Part Number: 7.075.797 fits on 3 Machines Request |
| Sleeve holder Ø22mm for high speed spindle
Part Number: 7.076.305 fits on 13 Machines Request |
| Double sleeve holder Ø30mm for high speed spindle
Part Number: 7.076.342 fits on 7 Machines Request |
| Sleeve holder for deep drilling Ø16mm
Part Number: 7.076.425 fits on 11 Machines Request |
| Double sleeve holder Ø25mm
Part Number: 7.076.728 fits on 11 Machines Request |
| Sleeve holder for deep drilling Ø12mm for backworking with coolant supply (internal)
Part Number: 7.076.904 fits on 10 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external or internal)
Part Number: 7.077.405 fits on 4 Machines Request |
| Triple sleeve holder Ø32mm with coolant supply (external or internal)
Part Number: 7.077.406 fits on 5 Machines Request |
| Triple sleeve holder Ø22mm with coolant supply (external or internal)
Part Number: 7.077.407 fits on 5 Machines Request |
| Triple sleeve holder Ø32mm with coolant supply (external or internal)
Part Number: 7.077.408 fits on 5 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
Part Number: 7.077.480 fits on 9 Machines Request |
| 4-station sleeve holder Ø22mm for high speed spindle
Part Number: 7.077.495 fits on Star SW-20 Request |
| Sleeve holder for deep drilling Ø32mm with coolant supply (internal)
Part Number: 7.078.226 fits on 3 Machines Request |
| Triple sleeve holder for high speed spindle Ø22mm
Part Number: 7.079.060 fits on Star SW-12RII Request |
| 5-station tool holder; shank: 12x12mm
Part Number: 7.079.542 fits on Star SR-10J Request |
| Sleeve holder Ø25mm; with coolant supply (internal)
Part Number: 7.079.575 fits on 2 Machines Request |
| Triple sleeve holder Ø32mm with coolant supply (external or internal)
Part Number: 7.170.167 fits on 5 Machines Request |
| Sleeve holder for deep drilling Ø12mm
Part Number: 7.170.390 fits on 11 Machines Request |
| Drill sleeve DECOFLEX®15 for backworking
Part Number: 7.170.783 Also Available 183 Adapter fits on 5 Machines Request |
| 3-station tool holder; shank: 12x12mm; with coolant supply (external) for BIMU system
Part Number: 7.170.842 fits on 3 Machines Request |
| Sleeve holder for deep drilling Ø16mm
Part Number: 7.170.845 fits on 11 Machines Request |
| Upgrade set for cross drilling-/milling unit DECOFLEX®15
Part Number: 7.170.865 Also Available 183 Adapter fits on Star SB-16D/E Request |
| Sleeve holder for deep drilling Ø32mm with coolant supply (internal)
Part Number: 7.171.030 fits on 3 Machines Request |
| Triple sleeve holder Ø25mm for high speed spindle
Part Number: 7.171.140 fits on Star SW-12RII Request |
| 4-station sleeve holder for high speed spindle Ø25mm
Part Number: 7.171.878 fits on Star SR-38 (Type A/B) Request |
| Double sleeve holder Ø32mm
Part Number: 7.172.150 fits on Star SR-38 (Type A/B) Request |
| Drill sleeve ER16; shank: Ø22mm
Part Number: 736-20-00 , fits on 5 Machines Request |
| Drill sleeve ER16; shank: Ø22mm; for deep drilling
Part Number: 736-21-00 , fits on 13 Machines Request |
| Tap sleeve MT1; shank: Ø22mm
Part Number: 736-22-00 , fits on 9 Machines Request |
| Drill sleeve ER11; shank: Ø22mm
Part Number: 736-23-00 , fits on 4 Machines Request |
| Drill sleeve T7; shank: Ø22mm
Part Number: 736-24-00 , fits on Star SV-32JII Request |
| Tap sleeve ER16; shank: Ø22mm
Part Number: 736-30-00 , fits on Star SV-32JII Request |
| Tap sleeve ER11; shank: Ø22mm
Part Number: 736-31-00 , fits on Star SV-32JII Request |
| Thread die sleeve Ø25mm; shank: Ø22mm
Part Number: 736-36-00 , fits on 4 Machines Request |
| Thread die sleeve Ø20mm; shank: Ø22mm
Part Number: 736-37-00 , fits on 4 Machines Request |
| Thread die sleeve Ø30mm; shank: Ø22mm
Part Number: 736-38-00 , fits on 3 Machines Request |
| Boring sleeve Ø8mm; shank: Ø22mm
Part Number: 736-40-00 , fits on 10 Machines Request |
| Boring sleeve Ø10mm; shank: Ø22mm
Part Number: 736-41-00 , fits on 10 Machines Request |
| Boring sleeve Ø12mm; shank: Ø22mm
Part Number: 736-42-00 , fits on 10 Machines Request |
| Boring sleeve Ø6mm; shank: Ø22mm
Part Number: 736-44-00 , fits on 10 Machines Request |
| Thread die sleeve Ø16mm: shank: Ø22mm
Part Number: 761-36-00 , fits on 2 Machines Request |
| Tool holder; shank: 16x16mm
Part Number: 781-01-00 , fits on 5 Machines Request |
| tool holder; shank: 16x16mm; adjustible in height
Part Number: 781-03-00 , fits on Star SV-32 Request |
| Tool holder; shank: 16x16mm; for inverse turning direction
Part Number: 781-07-00 , fits on Star SV-32 Request |
| tool holder; shank: 16x16mm; for inverse turning direction; adjustable in height
Part Number: 781-08-00 , fits on Star SV-32 Request |
| Sleeve holder Ø22mm
Part Number: 781-10-00 , fits on 5 Machines Request |
| Sleeve holder for deep drilling Ø32mm
Part Number: 781-11-00 , fits on 5 Machines Request |
| Sleeve holder Ø32mm
Part Number: 781-12-00 , fits on 3 Machines Request |
| Double sleeve holder Ø22mm
Part Number: 781-13-00 , fits on 2 Machines Request |
| Sleeve holder Ø22mm for backworking
Part Number: 781-16-00 , fits on 2 Machines Request |
| Drill sleeve MT1; shank: Ø32mm; for deep drilling
Part Number: 781-21-00 , fits on 9 Machines Request |
| Drill sleeve MT2; shank: Ø32mm; for deep drilling
Part Number: 781-22-00 , fits on 9 Machines Request |
| Drill sleeve ER16; shank: Ø32mm; for deep drilling
Part Number: 781-25-00 , fits on 10 Machines Request |
| Thread die sleeve Ø38mm; shank: Ø32mm
Part Number: 781-35-00 , fits on 4 Machines Request |
| Boring sleeve Ø16mm; shank: Ø32mm
Part Number: 781-43-00 , fits on 9 Machines Request |
Copyright 2025 STAR Micronics | Home
| Who we are